Good cartridge for Giraffe

I’m going to SA in August, I’ll be taking a .375 HH. What bullets are recommended for giraffe? I’ll be taking a lot of federal 300 grain swift A frame. But I wonder if it won’t penetrate well enough due to the thickness of the giraffes hide?…
They’re good for anything short of elephant and rhino. I wouldn’t worry about it at all
 
I’m going to SA in August, I’ll be taking a .375 HH. What bullets are recommended for giraffe? I’ll be taking a lot of federal 300 grain swift A frame. But I wonder if it won’t penetrate well enough due to the thickness of the giraffes hide?…
.375 caliber, 300 grain Swift A-Frames will be good. Others I’d recommend (all 300 grain or more) Barnes TSX, Norma Oryx and Federal Trophy Bonded Bearclaw.

Only load solids at the request of your PH. These are typically not necessary for giraffe.
 
Excellent, I think I’ll be in good shape then!
You are! Stay with those. Take solids for little stuff and or elephant or rhino;)
 
I’m going to SA in August, I’ll be taking a .375 HH. What bullets are recommended for giraffe? I’ll be taking a lot of federal 300 grain swift A frame. But I wonder if it won’t penetrate well enough due to the thickness of the giraffes hide?…
I used a 375 H&H with a 300 grain Peregrine bullet. My big bull was a frontal shot and he only took a few steps before dropping. The hard part is getting close enough on foot to get a good shoot. My bull once we hit the ground became very weary and hard to get close too.

My suggestion is taking a rifle and pistol and if you get close enough use the pistol.
 
I’m going to SA in August, I’ll be taking a .375 HH. What bullets are recommended for giraffe? I’ll be taking a lot of federal 300 grain swift A frame. But I wonder if it won’t penetrate well enough due to the thickness of the giraffes hide?…
This would be a great choice in my opinion. My 300 grain, 375 H&H went through the chest bone and into the back leg. I thought it was plenty of bullet and caliber for a clean kill. It is a very thick hide, but it worked for me. My PH said he had shot a lot of giraffes with this combination without issue when the bullet was properly placed.
 
I believe their skin is nearly 1" thick in places. A high-powered "deer" cartridge to the head OR a .375 HH in the body (and using solids or Barnes TSX isn't a bad idea at all). I (single) lunged a huge, dark old boy in Zim w/ a 375, but it took off as if unharmed, so I grabbed my 264 WSM (w/ 160 Woodleighs), gave chase and brained it from afar to put it down. Use Enough Gun! This was back in the day when the giraffe were decimating forest like elephants in places, and the landowner would allow PHs to go after 'em for free! This fed a LOT of people from surrounding villages and I was happy to hear tractors w/ wagons (full of hungry helpers) coming closer in the distance from miles away...

ZimbabweLemco20070726 034.jpg
ZimbabweLemco20070726 079.jpg
ZimbabweLemco20070726 083.jpg
 
Last edited by a moderator:

Forum statistics

Threads
64,743
Messages
1,426,025
Members
132,446
Latest member
ChadwickLe
 

 

 

Latest posts

Latest profile posts

American marketing tour update!

flights are booked Uber rides confirmed, car hire deposit paid! Hotels booked!

Im getting ready to go but first I have a 3 week photo Safari tour scouting some locations in the Limpopo province for future Photo safari tours! watch this space for awesome updates and footage !!!

Remember ISE Show 8-11 Jan in Denver Colorado!

Then from there I will be traveling by car for over a week
gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
 
Top