EAW pivot mounts

Hornedfrogbbq

AH fanatic
Joined
Mar 8, 2022
Messages
514
Reaction score
758
Well folks, I am raising the white flag with my open sights on two Sodia combo guns. The sights are too "fine" and my older eyes just struggle with what used to be second nature - getting the rear and front sight on amd seeing the target well at 50 plus yards.

I know NECG has the mounts and ability to put them on the guns. Anyone done anything similar? Both the guns have a 12ga barrel so i do want the ability to remove the scope i would put on either.

Thoughts? I have some claw mounts on a drilling that work great but that is probably too expensive a solution for these weapons.
 
Well folks, I am raising the white flag with my open sights on two Sodia combo guns. The sights are too "fine" and my older eyes just struggle with what used to be second nature - getting the rear and front sight on amd seeing the target well at 50 plus yards.

I know NECG has the mounts and ability to put them on the guns. Anyone done anything similar? Both the guns have a 12ga barrel so i do want the ability to remove the scope i would put on either.

Thoughts? I have some claw mounts on a drilling that work great but that is probably too expensive a solution for these weapons.

The prices will be comparable (expensive) with either Pivot or Claw mounts in your circumstances. I recommend you send the guns to NECG to do the work. You're looking at about $1500-$2000 per gun becuase they have to fit a saddle to hold the pivot bases on a break action weapon, then blue them, etc.

The advantage of the pivot mounts is you can change scopes and rings. You may want a pivot mount RMR and a pivot mount scope for your particular weapons.

I would remind you that combo guns and drillings are illegal for hunting in most US States due to the silly laws that say you can't have a shotgun with you when hunting big game, can't have a rifle with you when hunting grouse or turkey, etc. You're subject to fines if a warden decides to hold you to the letter of the law.

You might be better putting all this money into different guns and leaving the combo guns as they are.
 
@Hornedfroggbbq: Call JJ or Todd. They can take care of you. Depending on where you are in Texas, you can do a short road trip and drop them off at their shop.

Safe shooting
 
EAW pivot mounts are not $1200-1500.
 
EAW pivot mounts are not $1200-1500.

EAW Pivot mounts are $700-$900. However, when putting them on the rib of a break action gun, that is expensive. You must machine out the rib, drift in a pivot base, etc, etc. It's not cheap.
 
There are hundreds of options, post photos and I can send you some options.

Or contact Optics Trade in Slovenia, they have 99% of the gun world covered in mounts.

They probably have something that would work. They are the largest optics retail company and reloading company in Europe.

You can also email Triebel and ask them what they have. They don't normally sell to us in Europe retail, you have to go through a dealer for their specialist stuff.

Post photos, or email Optics Trade.
 
I’d actually go with the Croatian Rusan copies of the EAW pivot mount. I just mounted a set of them on a Sako and it was a breeze. I’ve also done an EAW pivot mount on a Mauser and that was more challenging because it was an older surplus action built into a high end sporter. The Rusan mounts and bases were every bit as high quality as the EAW and half the cost. Bases and rings for the Sako were right at $250 I think from Optics Trade.
 

Forum statistics

Threads
66,795
Messages
1,479,237
Members
142,522
Latest member
sunwin2026ukcom
 

 

 

Latest profile posts

RK Packers and Movers Dindigul



RK Packers and Movers in Dindigul is a highly trusted provider of packing and moving solutions in Tamil Nadu.

Packers and Movers in Dindigul,

Plot no 16, GTN college Road, kanthavel Nagar,

Nandhavanappatty,

Dindigul, Tamil Nadu 624001



rkpackersdgl@gmail.com

https://www.rkpackersandmover.in/
swashington wrote on Hyde's profile.
Hey Steve, This is Steve Washington we met at KMG last year. I am interested in your Winchester. Would love to speak with you about it. I work third shift and I cannot take a phone with me to work. Let me know a good time to call during one of your mornings. My phone is 239 565-8988. Live in Florida so I have to account for the time difference.
Look forward to hearing from you.
Ray B wrote on woodsman1991's profile.
Hi @woodsman1991 -
I'm Ray Boone
217 Scholze Street
Leavenworth, WA
98826-1335
(509)548-4206
RaynJoan50@Hotmail.com

Reply with name/address and I'll get a check into tomorrow's mail.
Boela wrote on Slider's profile.
Good day, Slider.

Do you by any chance have any 500NE brass left that you are willing to part ways with?

Best regards,
Boela Bekker.
Saddlemaker wrote on ftothfadd's profile.
$200.00 plus shipping
 
Top