CZ 550 scope ring dove tail grooves

[Maskell Shotgun academy]

Hay guys
anyone have any experience with CZ 550 receiver dove tail grooves for the rings not straight and tally or factory rings not going on perfectly so the scopes are not aligned correctly?
looking for solutions
Regards
Mike

 

[Grumpy gumpy]

Can turn the rings around 180* and see if that makes a difference
Gumpy

 

[Maskell Shotgun academy]

Can turn the rings around 180* and see if that makes a difference
Gumpy

can only do that with the front mount

 

[Woodcarver]

Hay guys
anyone have any experience with CZ 550 receiver dove tail grooves for the rings not straight and tally or factory rings not going on perfectly so the scopes are not aligned correctly?
looking for solutions
Regards
Mike

How far off are they? Unless they are somehow severely misaligned, a lapping bar will take care of the typically minor adjustment needed.

Wheeler Scope Ring Alignment Lapping Combo Kit 1 30mm

This kit improves scope mounting two ways. First, the short bars let you know when the front ring is in perfect alignment with the rear one. Second,...

www.midwayusa.com

also available for 1" or a set with both

 

[Maskell Shotgun academy]

How far off are they? Unless they are somehow severely misaligned, a lapping bar will take care of the typically minor adjustment needed.

Wheeler Scope Ring Alignment Lapping Combo Kit 1 30mm

This kit improves scope mounting two ways. First, the short bars let you know when the front ring is in perfect alignment with the rear one. Second,...

www.midwayusa.com

also available for 1" or a set with both

Thanks for your reply
I also have that same kit, I can tell you from experience it’s not easy to get them perfectly right/straight, of ordered another set of rings from a different supplier to see if they might work, the original rings from CZ are closer than the tally ones but still not straight