Barrel Life Of A 375 H&H

Aussie375

New member
Joined
Jul 24, 2009
Messages
3
Reaction score
1
I am just wondering for all you guys with a lot of 375 experience what you could expect the barrel life to be in regards
to the round count . I have a RSM H&H which shoots clover leafs with a handloaded 300GRN Hornady bullet and i cant
seem to put the thing down.
 
Nothing to really scientifically support this but it would seem that a relatively slow moving round with a low chamber
pressure would be pretty easy on the lands and grooves.

I mean a .220 Swift it ain't

If you are really pouring it down range all I would watch for is barrel heating

But then again...I could also be wrong
 
I cant give you a number but it will be thousands with proper care. As second wind stated barrel heating is enemy #1. Any more than a couple shots is hard on the barrel. The hotter it gets the worse it gets, if you want to shoot a box or more at the range without long periods of cooling you will shorten the barrel life.

A good tip for cooling a barrel more efficiently is to lean the gun barrel up and leave your bolt open. The heat in the barrel will cause a chimney effect and draw cool air up from the bottom.
 
If you really want to cool that barrel down fast

just keep a bucket of soapy water around and run a swag through it after each round

No wait....that was for my 12 pounder

never mind
 

Forum statistics

Threads
54,737
Messages
1,161,541
Members
94,744
Latest member
RileyBetan
 

 

 

Latest profile posts

Our trophy shed is filling up and we are only getting started,

cwpayton wrote on CM McKenzie's profile.
Sir ,is that picture of you packing the shoshone river trail thru buffalo pass? Im trying to get a plan togather for a ride. do you pack professionally or for pleasure. thanks
Cal {cwpayton}
ghay wrote on gearguywb's profile.
Is this rifle sold? If not what is the weight of it and do you know if there is enough difference in diameter between the 35W and the 9.3 to allow for a rebore to a 9.3x62 which is what I am after?
Thanks,
Gary (Just down the road in Springfield)
Woods wrote on Hunter-Habib's profile.
Forgive me if this is the incorrect area, I signed up to this forum just now because I wanted to be on the list to purchase a copy of your autobiography. Please feel free to pass my information along to whomever is selling. Thank you so much. I look forward to it!
I like the Tillie in my picture. They are supposed to fit loose (2 fingers inside hat band), have mesh for cooling, and hold their shape after washing.
 
Top