Wildcatter
AH enthusiast
I no longer have a 470 Nitro but I still have all of my gear for casting custom bullets for 470 as well as light for caliber bullets for practice. Included in this kit are the following:
1) Custom Accurate Moulds three cavity which molds a custom gas checked flat point of 530gr
2) Lee push through sizer for 0.476”
3) Lee 400gr plain base 0.476” mould
4) full sack of 500 Gator 0.476” gas checks
5) 30ea 410gr gas check and lubed LBT bullets
6) full box of 50 Speer Deep Curl 325gr
7) full box of 50 Speer Gold Dot 400gr
8) samples of cast bullets from the Lee mould in hardball alloy
9) 3D printed funnel for 475 caliber
10) 3D printed loading tray for 470 Nitro or other 475 caliber cartridge of your choice
I should note that the custom Accurate Molds has one cavity for 530gr 0.476” bullets and two cavities for 200 grain 0.358” gas checked bullets.
I’ll take $250 for the whole kit or trade toward an Italian single action revolver in 45 or 44-40.
1) Custom Accurate Moulds three cavity which molds a custom gas checked flat point of 530gr
2) Lee push through sizer for 0.476”
3) Lee 400gr plain base 0.476” mould
4) full sack of 500 Gator 0.476” gas checks
5) 30ea 410gr gas check and lubed LBT bullets
6) full box of 50 Speer Deep Curl 325gr
7) full box of 50 Speer Gold Dot 400gr
8) samples of cast bullets from the Lee mould in hardball alloy
9) 3D printed funnel for 475 caliber
10) 3D printed loading tray for 470 Nitro or other 475 caliber cartridge of your choice
I should note that the custom Accurate Molds has one cavity for 530gr 0.476” bullets and two cavities for 200 grain 0.358” gas checked bullets.
I’ll take $250 for the whole kit or trade toward an Italian single action revolver in 45 or 44-40.
