450 NE reloading data

Saverio

New member
Joined
Jun 17, 2025
Messages
3
Reaction score
0
Hi everybody, I am looking for reloading data for 450 NE with Vihtavuori 140 amd160. Any suggestions? Thanks, Saverio
 
Given I have a Rigby 450 NE DR, I ran Quick Load for you. Attached are the readouts for both 140 and 160 powder. Please note the following: I did not have the 485 grain so I used the 500 grain bullets. The 160 was the clear winner to me given I could get 2082 FPS with almost a 95% fill rate meaning you do not need fillers although I love to use them for my RL15.5 powder. Hope this helps!
 

Attachments

Given I have a Rigby 450 NE DR, I ran Quick Load for you. Attached are the readouts for both 140 and 160 powder. Please note the following: I did not have the 485 grain so I used the 500 grain bullets. The 160 was the clear winner to me given I could get 2082 FPS with almost a 95% fill rate meaning you do not need fillers although I love to use them for my RL15.5 powder. Hope this helps!
Thanks a lot! Very useful for me because it is the first time I reload this caliber. By chance is it possible with Quick Load to find data for a 400 grains bullet? I would like to use for wild boar here in Europe…
 

Attachments

  • 67097b3b-d4d6-4e75-9446-24383bfbf17d.jpeg
    67097b3b-d4d6-4e75-9446-24383bfbf17d.jpeg
    47.9 KB · Views: 53
Hi everybody, I am looking for reloading data for 450 NE with Vihtavuori 140 amd160. Any suggestions? Thanks, Saverio
What weight bullet are you looking at??
 
For the 400grn bullet n160 max load is 96.3grn start is 88grn
N140 max is 84.1 start is 79.2.

I got that from xxl reloading. Hope that helps
 
Could any of you run the data on N150 powder and 480 grain bullet in .450NE....? From using these powders in a .470..140 require filler...N160 give substantially more recoil, but the N150 at 90-91,5 grains and 500 grain bullet give about 2150fps with less recoil than N160..with no filler.

Reason for asking is that I want to load my .475 3 1/4 with these powders...this round is almost identical to .450NE..
 
Has any one noticed temp problems with N140 when it gets hot like in the Zambezi valley?
Cheers
 
Could any of you run the data on N150 powder and 480 grain bullet in .450NE....? From using these powders in a .470..140 require filler...N160 give substantially more recoil, but the N150 at 90-91,5 grains and 500 grain bullet give about 2150fps with less recoil than N160..with no filler.

Reason for asking is that I want to load my .475 3 1/4 with these powders...this round is almost identical to .450NE..
Sorry just saw this zi will run for you today
 

Forum statistics

Threads
65,556
Messages
1,447,185
Members
136,859
Latest member
AllisonM18
 

 

 

Latest posts

Latest profile posts

Woza it has been a busy few weeks!

Here below are the updated available dates for this the 2026 season

9-28 Feb open

21-25 March open

16-24 April is open

18-13 June is open this would awake time for kudu or Buffalo hunt!

9-19 July open will be very good for Kudu or Buffalo hunt!

14-30 September is open would be perfect time for late buffalo tracking hunt

October is wide open,

please contact me for more in
Woodcarver wrote on RAVEN ROCKS PRECISION's profile.
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
No Promises wrote on swoobie's profile.
X5i scope is perfect - thanks for an easy transaction! Buy with confidence.
Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
Ray B wrote on JMJ888's profile.
I am righthanded, so not interested in the rifle, but I have a 375 RUM and 350 gr bullet loading data is very hard to come by. If you could reply with information regarding your loads I would greatly appreciate it. Thank you, Ray Boone, Leavenworth, WA
 
Top