150gr TSX in 308 Win

Can't help you with a load but I would recommend the TTSX over the TSX. In my opinion it is a vastly better bullet.
 
I use the 150 gr ttsx in my .308. It is loaded with 44 grains of IMR 4895. I cannot give you any velocity or ballistic particulars on the load, but it is a very accurate load in my rifle. I have used the 150 grain ttsx bullets in my 308 on whitetail, hogs, elk, red stag, wildebeest, gemsbok, leopard, waterbuck, zebra, bushbuck, and impala. Red stag and wildebeest being the only animals that were given a follow up shot.
 
Alaska, sorry I can’t help you with the 308, but I’ve had pretty good luck using the online accuracy loads on the Barnes website. You might try them. They have worked pretty well in my 30-06, 300 WM and 375 H&H.
Best of luck!
 
Just an FYI on the Barnes 150 TTSX. When I started reloading them in my 30-06 I discovered the bullet is different from the factory loaded bullet.
2546F0C0-B227-4EFA-A47B-CFE4CBCA08C8.jpeg

I emailed Barnes and they said it was designed for the 300WM, thus the additional groove as you see in the photo.
I just thought this might be of interest to you.
 
Last edited by a moderator:
I shoot the 168 TTSX out of 308's and in front of 42.5 gr of H4895, super accurate and deadly.
 

Forum statistics

Threads
54,447
Messages
1,154,659
Members
94,165
Latest member
KandiKirwa
 

 

 

Latest profile posts

ghay wrote on No Promises's profile.
I'm about ready to pull the trigger on another rifle but would love to see your rifle first, any way you could forward a pic or two?
Thanks,
Gary [redacted]
Heym Express Safari cal .416 Rigby

Finally ready for another unforgettable adventure in Namibia with Arub Safaris.


H2863-L348464314_original.jpg
Unforgettable memories of my first hunting safari with Arub Safaris in Namibia (Khomas Hochland) !!!

Namibia.jpg
Oryx.jpg
Kudu.jpg
ghay wrote on Joel Rouvaldt's profile.
Love your rifle! I'm needing a heavier rifle for Africa. Sold my .375 Dakota Safari several trips ago. Would you have any interest in a trade of some sort involving the custom 338/06 I have listed here on the site ( I have some room on my asking price. I also have a large quantity of the reloading components and new Redding dies as well as a box of A-Square Dead Tough ammo.
dogcat1 wrote on WAB's profile.
They are yours. Please send your contact info and which pair you want.
Thanks,
Ross
 
Top