Mark458 , they say theres no stupid question, so testing that, Id ask why a man with even minimal shop experience couldnt drill out the bullet and and run the leading edge with a belt sander and get positive results, no more difficult than reloading? Having the thot IM going to try it as I just recently bought 3 boxes of 375 solids for practice Im going to see if its even phyisable with out ruining the ballistics totally , mostly in bullet wieght.I posted earlier this year on another thread about the TSX and similar bullets. I talked with the owner of Aria Ballistic Engineering and he told me they did extensive testing with the TSX and other mono metal petalling bullets. They found that the primary cause of inconsistent expansion was excessive fowling within the cavity of the bullet. They found that if they cleaned out the cavity and shaped up the front surface of the bullet it improved performance by 15-20%. This includes consistent petalling and weight retention. In addition they were surprised to find how much it increased expansion diameter as well.
They do the cavity modification on the custom loads they sell at no additional cost. They know that the improvement in performance will keep customers returning.
The bullet manufacturers are aware of the issues and accept the failure rates because they know that individually modifying each bullet would price them out of the market.
Perhaps the bullet in the previous picture and others you hear stories about had excessive fowling or debris within the cavity. Hard to determine, but it's a possibility that could have led to the failure.
I have included a couple of pictures with bullets with and without the modification. You can easily see the difference.View attachment 806118View attachment 806119
I never said it was a difficult fix. I just passed on the results of the testing.Mark458 , they say theres no stupid question, so testing that, Id ask why a man with even minimal shop experience couldnt drill out the bullet and and run the leading edge with a belt sander and get positive results, no more difficult than reloading?
To properly clean out the hollow and be consistent, you would need a lathe with a collet chuck with a depth stop on it, and use an appropriate sized end mill cutter in the tail stock in either a good quality drill chuck or another collet chuck again with a depth stop or a scale. This would give consistent results that should cut down on the sort of variation that would make instability an issue. This would be for more than one or two projectiles, and yes, you could use a cordless drill in your mothers basement whilst wearing a white leather gimp suit ( whatever makes you happy) but not if you want consistent results
Gumpy
Nice cordless drill you have there. Is that a DeWaltCan I just use these tools Ive got on hand, was gonna send ammo to neighbor's machine shop to run on a CNC ,but if you want it done right do it yourself. how bout it boss.
View attachment 808265