Bertram 9.3x74R Brass Who Uses It

pc3

AH enthusiast
Joined
Apr 18, 2015
Messages
283
Reaction score
495
Location
Australia
Media
7
Hunting reports
Africa
1
Hunted
South Africa, New Zealand, Australia
Folks needed some more cases and Norma is virtually unobtainable at the moment here...so I have ordered some Bertram.

Wondering if anyone knows the difference between this and Norma. My load with Norma is 63 gr of AR2209 behind the 286 Woodleigh and it shoots pretty good through the Chapuis.

Wondering what others loads are and their experiences and if they have made a change from Norma to Bertram did the load charge change much ?
 
I recently bought 100 Bertram 9.3x74R cases. I haven't loaded them yet but they look like good quality brass. There are a number of internet reports which suggest that Bertram brass is a bit brittle from the factory. This is probably just internet lore or leftover tales from the early days. The cases I received appear to have been annealed by the factory, however I put them through my annealer just to make sure. The brass does appear a little thicker than my previous brass (Winchester and Sako).

As with any major change of components, I'd recommend a few test loads starting 10% less powder and working up from there.

ps. By supporting a local manufacturer, we reduce our dependence on international supply chains.
 
Thanks for the reply. Yep agreed, hopefully Bruces son keeps it going when Bruce retires.
 
Bertram brass is a bit brittle from the factory
In my experience this is correct. I alway anneal Bertram brass before I use it, otherwise you will get some split cases. Especially if you are wanting to form it.
 
Cases arrived look very well made.

Anyone have loads with 286gr bullets in Bertram cases they would like to share ?
 

Forum statistics

Threads
70,526
Messages
1,578,772
Members
171,434
Latest member
ToniTorode
 

 

 

Latest profile posts

Soon to be chasing dove and quail in AZ.
Hornedfrogbbq wrote on Rhoyland4's profile.
Do you mind me asking what auction you are referencing? I'm not in the market for any of those rifles...just curious.

Frosty in Fort Worth
Getting some culling done!

K_P wrote on Buckleyguy12's profile.
Good morning from Montana.

I'm looking at a post from 2018 where you were looking for a lefty Winchester in .375 H&H Magnum. I'm selling mine. My email is [redacted] in the event that you're still searching for a unicorn.

Best,

Kelly Palmer
Gents, if you book and pay your deposit before the end of this year , you can have the bigger cull package for the 2026 price! https://www.africahunting.com/threa...griffiths-safaris-starting-at-us-2-560.96285/
 
Top