World's most popular community & resource for hunting in Africa since 2007
Krieghoff Classic "Big Five" Rifle Picatinny Base
- Thread starter SStomcat
- Start date
jamitchbikes
New member
- Joined
- Nov 10, 2022
- Messages
- 14
- Reaction score
- 27
Longfeather1
AH veteran
- Joined
- Sep 18, 2014
- Messages
- 116
- Reaction score
- 174
- Location
- Fayetteville, PA. U.S.A.
- Member of
- Safari Club International, Life Member
- Hunted
- South Africa, Namibia, Zimbabwe
I inquired about this mount directly with Krieghoff International here in PA. According to their head gunsmith the mount itself is available for $230.00 US. However, it needs to be fitted by them, most assuredly at additional cost. Not sure I really believe that. Probably any competent gunsmith could fit it. He said the mount only works with the Aimpoint Acro P2.
I also directly inquired about a picatinny mount mad by Krieghoff UK. According to them, their mount is made to changed out by the gun owner. See below video link. Their mount costs about $180.00 U.S. Unfortunately, the UK regulations won't permit them to ship the mount to the U.S.
Was actually thinking about asking some of our UK based forum members about helping out with acquiring one.
I'm also actually considering getting a gunsmith to mill out a picatinny mount like the UK version.
Link to UK video
I also directly inquired about a picatinny mount mad by Krieghoff UK. According to them, their mount is made to changed out by the gun owner. See below video link. Their mount costs about $180.00 U.S. Unfortunately, the UK regulations won't permit them to ship the mount to the U.S.
Was actually thinking about asking some of our UK based forum members about helping out with acquiring one.
I'm also actually considering getting a gunsmith to mill out a picatinny mount like the UK version.
Link to UK video
I'm really not sure as to why a cut out designed to fit specifically would need some gunsmitthing. What I'm therefore guessing is it needs some milling and perhaps regulation.
I had a similar discussion with the head gunsmith at Gordy's and he also alluded to the same. He also mentioned that the rifle needs to be sighted after the fact.
I should also mention that the head of their guns sales advised against using a red dot, said it always may not work. I have no experience with red dots except on pistols which seems to work great.
I had a similar discussion with the head gunsmith at Gordy's and he also alluded to the same. He also mentioned that the rifle needs to be sighted after the fact.
I should also mention that the head of their guns sales advised against using a red dot, said it always may not work. I have no experience with red dots except on pistols which seems to work great.
Longfeather1
AH veteran
- Joined
- Sep 18, 2014
- Messages
- 116
- Reaction score
- 174
- Location
- Fayetteville, PA. U.S.A.
- Member of
- Safari Club International, Life Member
- Hunted
- South Africa, Namibia, Zimbabwe
I had spoken with Kreighoff sales about this at the SCI show. You can order the Aimpoint installed as an option on a new gun or have it installed if your gun has the removable block already installed in the back of the rib. My understanding is it is done at their facility in PA.
Being that they, Krieghoff sales, are offering a red dot as an option I don't think it would be an issue using one as long as it's not some monstrously sized one.
Being that block is already removeable and is at the very rear of the barrels I seriously doubt it would affect the regulation
Being that they, Krieghoff sales, are offering a red dot as an option I don't think it would be an issue using one as long as it's not some monstrously sized one.
Being that block is already removeable and is at the very rear of the barrels I seriously doubt it would affect the regulation
I concur, I'm just relaying what the guy at Gordy's said. Many people have done that mostly going the custom route and are happy.
There is a Krieghoff on sale at Gordy's that claims that it comes with a factory cut out for Aimpoint Accro, I'm guessing it is the same thing.
jamitchbikes
New member
- Joined
- Nov 10, 2022
- Messages
- 14
- Reaction score
- 27
I just ordered the adapter and installed myself, it’s two torx screws. Took 5 min. Works fine
Longfeather1
AH veteran
- Joined
- Sep 18, 2014
- Messages
- 116
- Reaction score
- 174
- Location
- Fayetteville, PA. U.S.A.
- Member of
- Safari Club International, Life Member
- Hunted
- South Africa, Namibia, Zimbabwe
I take it that was the Aimpoint adapter? If so, do you think it would work with a different site mount than the Aimpoint?
jamitchbikes
New member
- Joined
- Nov 10, 2022
- Messages
- 14
- Reaction score
- 27
Yes aimpoint adapter. I would assume it would work with anything compatible with Acro footprint.
BeeMaa
AH ambassador
- Joined
- Jun 11, 2017
- Messages
- 9,302
- Reaction score
- 27,274
- Location
- Alexandria, VA USA
- Media
- 151
- Articles
- 1
- Member of
- NRA Life Member, SCI Member
- Hunted
- Eastern US & RSA
I like that it co-witnesses the irons in the event of a failure.
No offense, but with that thing protruding over the breech, doesn’t it get in the way when feeding?
The Aimpoint sits flush and low to the barrel, and to me, it just looks much more refined and has a lot more finesse.
AZDAVE
AH ambassador
- Joined
- Jul 26, 2013
- Messages
- 5,817
- Reaction score
- 13,008
- Media
- 215
- Hunted
- South Africa,Namibia, Mozambique, Alaska,lower 48
None taken
Understand about the aimpoint.. But I am a function of form guy first. It in no way gets in the way of things and just flat out works. I am very lucky and can still irons, but in 24 Hyena was also on the hit list (Bugger didn't show up) and I was only taking my double so a night hunt was going to require some kinda optics as Irons don't work in the dark phase of the moon. But it shot so well and more accurately than irons that the rmr has stayed on my 500/416.
Wishing you the best of luck and good hunting.
Understand about the aimpoint.. But I am a function of form guy first. It in no way gets in the way of things and just flat out works. I am very lucky and can still irons, but in 24 Hyena was also on the hit list (Bugger didn't show up) and I was only taking my double so a night hunt was going to require some kinda optics as Irons don't work in the dark phase of the moon. But it shot so well and more accurately than irons that the rmr has stayed on my 500/416.
Wishing you the best of luck and good hunting.
That’s good to know. I’m sure functionality trumps over everything
Members online
- Chase723
- PHOENIX PHIL
- Dirtdart
- Rhoyland4
- djvdw
- Andrew62
- Andrew Short
- chashardy
- etsonaut
- DmacD
- Schmidty
- Aaron N
- TTundra
- Hombre
- TSIBINDI
- GKNOX
- roverandbrew
- DAK
- paul hardwick
- BB416
- Tanks
- kavinreed
- warningshot
- woodsrunner
- Rigby375
- cash_tx
- thoma018
- Sourdough
- Jefferry404
- Skshyk
- Parkerpusher
- Tubby’s Canteen
- Zinz
- Gun Talker
- Jack Stevens
- Jagerrand
- tkatzzz
- Tdsmith517
- Big_Easy
- UKHunter
- BeeMaa
- 318AE
- Russ16
- TexianHussar
- Grumpy gumpy
- RLD
- wesheltonj
- saswart
- Shaw
- LeftySixgun
Forum statistics
Latest profile posts
Alex Sniper wrote on Bynotic's profile.
Good morning. I see that you had a Sauer 202 for sale for $3,000. Did you sell it at that price?
I have one for sale as well. I listed it (on here ) at $3,000 as well. Is the price high, low or right where it should be?
Thanks. Alex. [redacted] in case you want to call me to discuss further. I appreciate your time help and support.
I have one for sale as well. I listed it (on here ) at $3,000 as well. Is the price high, low or right where it should be?
Thanks. Alex. [redacted] in case you want to call me to discuss further. I appreciate your time help and support.
