M98 Mauser groups 7mm Mauser

sestoppelman

AH ambassador
Joined
Apr 25, 2010
Messages
11,026
Reaction score
17,551
Media
178
Articles
4
Hunting reports
Africa
3
Member of
NRA, NA Hunt Club
Hunted
Tanzania, Botswana, Zimbabwe (2), Namibia (2), South Africa (2)
Last week I fired this target with my M98 Mauser in 7x57. 100 yards scoped and benched. Load is 150 gr Sierra Game King soft point, ahead of IMR4350, all 4 shot groups. First group fired was low and right, made a correction to the scope, fired one more sighter near target center and shot the upper left group.
Last group fired is but .23" c-c best I could measure by that method. Average of all 5 groups including the one called flyer is only .62". Toss out that flyer and the avg is only .487" for the 5 groups.
I consider this outstanding accuracy from an out of the box factory hunting rifle. Granted, these are not your average Remmy or model 70, Savage in performance or cost, they are a step above the fray.
This is the best target I have fired from this rifle that almost always shoots well under MOA. Certainly, the most accurate 7x57 I have owned among many.
IMG_2420.JPG
 
Last week I fired this target with my M98 Mauser in 7x57. 100 yards scoped and benched. Load is 150 gr Sierra Game King soft point, ahead of IMR4350, all 4 shot groups. First group fired was low and right, made a correction to the scope, fired one more sighter near target center and shot the upper left group.
Last group fired is but .23" c-c best I could measure by that method. Average of all 5 groups including the one called flyer is only .62". Toss out that flyer and the avg is only .487" for the 5 groups.
I consider this outstanding accuracy from an out of the box factory hunting rifle. Granted, these are not your average Remmy or model 70, Savage in performance or cost, they are a step above the fray.
This is the best target I have fired from this rifle that almost always shoots well under MOA. Certainly, the most accurate 7x57 I have owned among many.
View attachment 441417
Very impressive. What kind of groups do you get with 175 Gr bullets ?
 
Very nice shooting! I may have missed it, but did you post some pics of your M98?
What year is it from?
 
Very nice shooting! I may have missed it, but did you post some pics of your M98?
What year is it from?
I did when I first got it in another thread. Here is one of those. You can zoom in on it.
Bought new last year.
IMG_1621.JPG
 
I did when I first got it in another thread. Here is one of those. You can zoom in on it.
Bought new last year.
View attachment 441435

Ah right , those are the modern Mausers. Absolutely stunning. I have been looking a lot at those as well for a good smaller calibre, 7x57 would just be about perfect. How much did you purchase it for if you don’t mind?

You might be surprised, but despite that I live just next to their origin country, they are seldom in shops and pricing online is hard to find.
 
Last edited:
Ah right , those are the modern Mausers. Absolutely stunning. I have been looking a lot at those as well for a good smaller calibre, 7x57 would just be about perfect. How much did you purchase it for if you don’t mind?

You might be surprised, but despite that I live just next to their origin country, they are seldom in shops and pricing online is hard to find.
Over here, current prices are running about US$12,500, nearly double what I paid for this just a year or so ago.
 
I just bought one exactly like it and have yet to fire it, live in NYC and it’s cold!

I’m trying to figure out a scope for it. I have an older Schmidt and Bender 1-6x42, a couple Leupolds VX6i 1-6x20 and a Leupold1.5-5x20.

I think it may need a Swarovski X8i 1.7-13.4x42, I can swap that from a custom Ruger #1 6.5CM but then what do I put on that?

Any thoughts gentlemen?
 
I bought some Federal 140gr and 175gr loads and had John at Safari Arms Custom Ammunition whip up some sample loads with Barnes TSX 120grs.

I can’t find much else in factory ammo? Any favorite factory loads for this little beast?

Anyone use solids when in DG country, what load? With my 9.3x62 I usual load three 250gr Barnes solids then two 250 Barnes TSX on top. I like that in DG country?
 
Ah right , those are the modern Mausers. Absolutely stunning. I have been looking a lot at those as well for a good smaller calibre, 7x57 would just be about perfect. How much did you purchase it for if you don’t mind?

You might be surprised, but despite that I live just next to their origin country, they are seldom in shops and pricing online is hard to find.
Would you not consider an FN commercial action ? Or surely eGun has something.
 
I just bought one exactly like it and have yet to fire it, live in NYC and it’s cold!

I’m trying to figure out a scope for it. I have an older Schmidt and Bender 1-6x42, a couple Leupolds VX6i 1-6x20 and a Leupold1.5-5x20.

I think it may need a Swarovski X8i 1.7-13.4x42, I can swap that from a custom Ruger #1 6.5CM but then what do I put on that?

Any thoughts gentlemen?
I would put the Schmidt & Bender on the 6.5 and the swarovski on the mauser.
 
Last week I fired this target with my M98 Mauser in 7x57. 100 yards scoped and benched. Load is 150 gr Sierra Game King soft point, ahead of IMR4350, all 4 shot groups. First group fired was low and right, made a correction to the scope, fired one more sighter near target center and shot the upper left group.
Last group fired is but .23" c-c best I could measure by that method. Average of all 5 groups including the one called flyer is only .62". Toss out that flyer and the avg is only .487" for the 5 groups.
I consider this outstanding accuracy from an out of the box factory hunting rifle. Granted, these are not your average Remmy or model 70, Savage in performance or cost, they are a step above the fray.
This is the best target I have fired from this rifle that almost always shoots well under MOA. Certainly, the most accurate 7x57 I have owned among many.
View attachment 441417
@sestoppelman
Looks like 48.5gn is the go to load. Bloody good shooting and beautiful rifle to go with it. The old 7x57 is an amazing cartridge even tho not as flashy as these new ones. Gets the job done without fuss or bother.
 
i have bought 5 swedish rifles in 8x57 built in the late 40,s-early 50,s i think. on FN comersial 98 actions, three are D&T and two have adjustable triggers. i,m thinking about taking one and having a custom rifle made in 7x57 or 280 rem, or maybe a 7x57-280 rem ackly improved.
 

Forum statistics

Threads
64,650
Messages
1,423,609
Members
131,544
Latest member
NellyBeebe
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top