HELP - Who re-regulated my Sabatti 500 NE ?

buckstix

AH veteran
Joined
Jun 18, 2013
Messages
216
Reaction score
456
Website
www.buckstix.com
Media
22
Member of
NRA LIFE MEMBER
Hunted
US - CANADA
HELP - Who re-regulated my Sabatti 500 NE ?

Hello all,

I just bought a very nice Sabatti 92 Safari Deluxe in 500 NE caliber from Cabelas at a very reasonable price. It was advertised as having been re-regulated, but there was no test target or any indication of "who" did the work, or what ammo was used. It appears that whoever did the re-regulating also tuned the triggers, (smooth 5-1/2 and 6-1/2 lbs) and also upgraded to a NECG recoil pad.

The wedge has been left protruding, so this may be a clue as to who did this. I know that JJ sometimes leaves the wedge protruding because he did so one of my other doubles that he regulated for me. However, I am told he does not re-regulate Sabatti doubles.

I've talked with Ken Owen, and its not his work. He told me he always has the wedge flush.

Not sure who else does Sabatti re-regulation. I've been told not too many gunsmiths will re-regulate Sabsatti because they lack a wedge and some are hard soldered.

This one came from Colorado. If you know of someone from Colorado who recently sold his Sabatti 500 NE, show him this thread.

Anyone have any other suggestions? I'd like to find out what ammo its regulated for, before going through a lot of trial and error shooting.


500sab-1.jpg


500sab-2.jpg


500sab-3.jpg


500sab-4.jpg


500sab-5.jpg
 

Attachments

  • 500sab-1.jpg
    500sab-1.jpg
    38.8 KB · Views: 294
  • 500sab-3.jpg
    500sab-3.jpg
    83.6 KB · Views: 298
  • 500sab-5.jpg
    500sab-5.jpg
    49.7 KB · Views: 548
  • 500sab-2.jpg
    500sab-2.jpg
    79 KB · Views: 321
  • 500sab-4.jpg
    500sab-4.jpg
    61.1 KB · Views: 265
Last edited by a moderator:
Wish you the best of luck with the new rifle. Once you find out the who, let us know about the upcoming target groups. Gorgeous piece!
 
Did you get a good deal on the gun? It looks really nice!
 
Hello enysse,

thanks for the reply.

Yes, I got what I consider a "very good" deal on the rifle. I see you are in wisconsin ... where? .. I live south of Appleton.
 
I'm living currently down in Jackson, WI, I'm pretty close to the Richfield store. I see it everyday I work. And I use to live about 2.5 miles from the Green Bay location of Cabelas
 
good luck n finding out who did the regulation job. I know the factory regulates them with Hornady ammunition so thats a good starting point if you want to shoot some rounds
 
Hello Petrus Geldenhuys,

Thanks for the reply.

Yes, I've been told they used Hornady Ammo. But I'm not sure that was the ammo that was used for the re-regulation. But I will test Hornady ammo someday.
 
My Ma's from Florence, does that male me part Cheesehead?
 
Maybe Rob44, but you like the Bears....so "no"...lol
 
And proud of it, takes guts to back a Loser:LOL:

Well you are loyal, that is good quality. I like the Brewers and they are losers every year.
 
Hello Petrus Geldenhuys,

Thanks for the reply.

Yes, I've been told they used Hornady Ammo. But I'm not sure that was the ammo that was used for the re-regulation. But I will test Hornady ammo someday.

Hornady is the standard for many 500 NE rifles because its both cheap and available. (i would prefer Norma)

-matt
 
Hello matt85,

thanks for the reply.

Yes, I've been told Sabatti 500 NE cal Double Rifles were regulated with Hornady Factory Ammo.

I'm still trying to find out who in the Colorado area had the rifle re-regulated, here in the U.S.
 
Well you are loyal, that is good quality. I like the Brewers and they are losers every year.
At least the Cubs made it to the play-offs before getting blown out by the Mets
 
I too am looking at a Sabatti in .500 NE, so please post a review on it! I have held one and almost pulled the trigger on the purchase, but am still nervous as I read mixed reviews. I dream of a .500 NE and, for now at least, Sabatti would be my only option. Feed me info please! Lol
 
Hello Panielsen,

Thanks for the reply.

I think its important to get one that has been re-regulated (like mine) or plan on finding someone that will re-regulate it for you.

Also, the comb is too high, and the rifle is too light. Every time I would shoot it, it would "bite" me in the cheek bone.

I planned on removing about 3/8" off the comb nose, and leaving the heel as is, with the butt being 5-1/4" - just blending it.

This was my photo-shop mock-up before starting the stock re-work.

500-8b.jpg


This is how it turned out. I actually removed about 7/16" off the comb, and it totally quit biting my cheek bone.

I also added some weight in the stock. Its a bit "back heavy", but it swings fast on target, which I think is the most important factor.
newcomb.jpg


Also, I believe price is a big factor on these. What price were they asking on the rifle you were thinking to buy?
 

Attachments

  • newcomb.jpg
    newcomb.jpg
    53.5 KB · Views: 240
  • 500-8b.jpg
    500-8b.jpg
    138.5 KB · Views: 249
Last edited by a moderator:
$4500.00 from Cabelas. Haven't actually looked at it to see if it has the ground rifling though. Thank you and keep me updated as I am looking for a .500 NE double. Yours turned out really nice by the way!
 
Also, the comb is too high, and the rifle is too light. Every time I would shoot it, it would "bite" me in the cheek bone.

Now this is interesting. My Lott bites me and although I suspected it was a fit issue I didn't know exactly what it was. This might help me to figure it out. I still don't have it scoped, so I guess getting the scope on and seeing what happens is the next step.
 
Nice looking rifle Buckstix.

I like what you have done with the comb.

Looking at the muzzles it seems to have escaped the "Dremmel regulating". Good.

What have you fired through it so far and how did it regulate? Don't know if you hand-load but that will probably be the way to go. This is usual with most doubles unless you are lucky or they have some kind of user friendly adjustment (Blaser S2 for example? I think)

If both barrels shoot level (i.e. horizontal)* then all is good. Then it comes down (usually) to velocity.

If left and right group too far apart at chosen distance then increase velocity (more powder/lighter bullet or a mixture of both)

If L & R are crossing then decrease velocity. (Less powder/heavier bullet or mixture of both)

NB. Increasing the velocity may also lower the POI (and vice versa)

Its all about "barrel time" i.e. how long the bullet is travelling down the barrel whilst the recoil forces effect the position of rifle at the time the bullet leaves the muzzle and where the rifle is pointing when this happens.

The right barrel will generally move up and right the left does the opposite. (well that is my understanding of the dark art!)

(This is why you need to "regulate the rifle" in the same shooting position as you would use it in the field, i.e. off-hand or sticks, not on a lead sled)

Higher velocity may also lower the POI (and vice versa)

Good luck and keep us posted

* If both barrels do not shoot level than that is a whole different can of worms.

One step at a time…and…

Keep us posted and I hope this helps.
 
Now this is interesting. My Lott bites me and although I suspected it was a fit issue I didn't know exactly what it was. This might help me to figure it out. I still don't have it scoped, so I guess getting the scope on and seeing what happens is the next step.

Hello Royal27,

Thanks for the reply.

If you want to test if the comb height is a factor in biting you .... fashion a front site about 1/2" - 3/4" higher with some masking tape. This will raise your cheek off the comb. Then shoot the rifle. You'll be surprised at the difference. No more biting.
 

Forum statistics

Threads
53,616
Messages
1,131,207
Members
92,672
Latest member
LuciaWains
 

 

 

Latest posts

Latest profile posts

Impact shots from the last hunt

Early morning Impala hunt, previous link was wrong video

Headshot on jackal this morning

Mature Eland Bull taken in Tanzania, at 100 yards, with 375 H&H, 300gr, Federal Premium Expanding bullet.

20231012_145809~2.jpg
 
Top