What did you reload today?

Hah, that's great. One thing I'm looking at ordering this weekend is the .308 200 gr. Lazer for my 300 PRC. CEB told me it's NOT single feed and works great from mag boxes in 300 PRC. That bullet would be a hammer for a mountain rifle.
 
Did some load development for my 375 H&H using Safari Bullet Company 300gr and Hodgdon Varget.
3 shot group was at 100m @ 2455 fps

IMG_7435.jpg

B5615CE5-8823-4068-AE73-EB4748AD7B6A.jpg
 
Just tweaking seating depths for testing early next week.
 
Last edited by a moderator:
Why chase velocity when it’s accurate and everything I take aim at will die ?
@458 Exp
True but if'n you can combine accuracy with velocity even more of a good thing.
The point is as long as it works for you and your happy that's all that matters.
Bob
 
@Tintin
If you want I can look up some loads on load from a disc if you want and pm you.
Bob

Thanks Bob - I have Woodleigh book and Wright book - a few options there - but would be grateful for some more options (y)
 
500gr 458 Loaded.jpg


Loaded some Heavyweights again yesterday 500gr 458 Safari Bullket Company bullets for my Lott.
Wil test the speed this upcoming weekend my 500gr solids run 2280fops and pushed the softs a bit with more powder to see if they could print even closer to each other.

At the MOment my 500gr Impala solids and Safari Bullet print about 1 1/2" apart at 30 meters and woulkd obviously like them to be closer so lets hope the extra speed in the softs bring them closer.
Softs were loaded with Norma 203B and now swapped to N540 powder is a bit faster so lets see.

Hoping to run the softs at 2250fps previous load on softs were a tad under 2200fps
 
Loaded 30-06 with Safari Bullet Company (SBC) .308 180gr
Norma brass and VV N550

IMG_7530.jpg


Also loaded some 6x45 (6mm x 223) for testing the new SBC .243 85gr

IMG_7535.jpg
 

Attachments

  • IMG_7534.jpg
    IMG_7534.jpg
    2.5 MB · Views: 80
Practice ammo for the 10mm Auto:
180 Hornady FMJ - 12.8 gn 2400.
Next up some packin' in the woods ammo:
200 Swift - 9.4 gn N105
 

Forum statistics

Threads
64,637
Messages
1,423,391
Members
131,455
Latest member
Randal4127
 

 

 

Latest profile posts

Hi, I’m Mukesh, the creator of TimeCalculatorX.com — a simple and helpful resource for time calculation tools. I love building easy-to-use calculators related to hours, minutes, dates, countdowns, and everyday time conversions. https://timecalculatorx.com/
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top