Want To Buy CH4D Cannelure Tool

[SkullKeeper]

Looking for one in good condition. Thank you in advance for your help with this.

 

[Firearmdoc]

Looking for one in good condition. Thank you in advance for your help with this.

If you can give me a day or so, I have one that I tried using years ago. I have not used it in some time. I would be willing to let it go.

 

[SkullKeeper]

If you can give me a day or so, I have one that I tried using years ago. I have not used it in some time. I would be willing to let it go.

No problem -Thank you sir

 

[mgstucson]

I don't know what you want to use this tool on or how familiar you are with cannelure tools, but I would refer you to this discussion.

Thread 'Cannelure not right for a cartridge'

Jan 13, 2025

In an interesting twist (reloading master class): if you use bullets that aren't designed for your cartridge. IE: Using 50-110 bullets for a 500Nitro Express. The cannelure doesn't line up for crimping. Additionally, the seater die is designed for a roll crimp for the cannelure vice a tapered crimp against the bullet bearing surface.
So, I'm checking loaded rounds to make sure they fit in the chamber of my 500 Nitro Express single shot (TC Encore) but the Woodleigh 500gr FP loaded ammo is NOT dropping in flush because the case mouth flare to seat the bullets isn't being taken out enough...

• Capt_Oscar
• Replies: 35
• Forum: Reloading

• 

Also cannelure tools of various types pop up on fleabay from time to time. Just search for cannelure tool. Someone has a Corbin tool up right now and CH4D tools are not uncommon their. The Corbin tool is FAR superior to the CH4D.

 

[SkullKeeper]

I don't know what you want to use this tool on or how familiar you are with cannelure tools, but I would refer you to this discussion.

Thread 'Cannelure not right for a cartridge'

Jan 13, 2025

In an interesting twist (reloading master class): if you use bullets that aren't designed for your cartridge. IE: Using 50-110 bullets for a 500Nitro Express. The cannelure doesn't line up for crimping. Additionally, the seater die is designed for a roll crimp for the cannelure vice a tapered crimp against the bullet bearing surface.
So, I'm checking loaded rounds to make sure they fit in the chamber of my 500 Nitro Express single shot (TC Encore) but the Woodleigh 500gr FP loaded ammo is NOT dropping in flush because the case mouth flare to seat the bullets isn't being taken out enough...

• Capt_Oscar
• Replies: 35
• Forum: Reloading

• 

Also cannelure tools of various types pop up on fleabay from time to time. Just search for cannelure tool. Someone has a Corbin tool up right now and CH4D tools are not uncommon their. The Corbin tool is FAR superior to the CH4D.

Thank you for the direction on this - quite the discussion!

 

[raamw]

I have one $110 shipped Ican send out PIX to email or cell

 

[raamw]

 

[SkullKeeper]

Thanks to everyone that replied and sent PM’s - I have resolved my issue