Lobster.mike
AH member
- Joined
- Aug 20, 2017
- Messages
- 32
- Reaction score
- 25
Anyone using shims on their bases? I’m having a heck of a time raising the elevation on my M70.
World's most popular community & resource for hunting in Africa since 2007
Shims on bases?
- Thread starter Lobster.mike
- Start date
- Joined
- Apr 13, 2013
- Messages
- 10,409
- Reaction score
- 38,392
- Location
- Delaware, USA
- Media
- 104
- Articles
- 6
- Member of
- Atglen Sportsmen's Club, NRA, SCI
- Hunted
- RSA, DE, NJ, PA, KS, TX, ME
Burris Signature rings will allow you to raise a 1" up to 20 MOA, 30mm, 10 MOA.
Sika98k
AH elite
- Joined
- Mar 28, 2014
- Messages
- 1,380
- Reaction score
- 3,096
- Location
- Dublin,Ireland
- Media
- 101
- Member of
- Wild Deer Association of Ireland
- Hunted
- South Africa, Limpopo, Eastern Cape, Kenya,Namibia, Croatia, Morocco Ireland,Scotland,Czech, Denmark, Romania, Sweden,Norway,Latvia,Germany,Hungary,
Yes, I had an old 98k that I “sporterised” tapped for bases, bolt handle “adjusted” to clear the ocular bell on an old Kahles 4x.
I obtained some shims from Brownells that gave me a near perfect set up. The scope had a non-centered reticle, it was as close to the center for both elevation and windage as possible.
I obtained some shims from Brownells that gave me a near perfect set up. The scope had a non-centered reticle, it was as close to the center for both elevation and windage as possible.
This should help. You may also need to get longer screws for your bases. Just make sure you have enough thread engagement when you get it where you need it. Same company can help with the screws if needed.
To gain elevation you will need to shim the rear of the scope. Seems like a no brainer to most, but.........
https://www.brownells.com/gunsmith-...tools/scope-shims/scope-shim-kit-prod914.aspx
To gain elevation you will need to shim the rear of the scope. Seems like a no brainer to most, but.........
https://www.brownells.com/gunsmith-...tools/scope-shims/scope-shim-kit-prod914.aspx
Attachments
Last edited by a moderator:
Members online
- Witnessing
- Beerhunter
- AfricaHunting.com
- activemoveuk
- Warren Knudsen
- Corey0372
- grand veneur
- Pondoro
- Wes350
- mgstucson
- crossone
- RobBrown505
- Bejane
- KY Hunting Guy
- Lem
- Grandpa Moose
- Tex .416
- Lee in Texas
- Mekaniks
- Hornyman
- ElevenBravo
- usactivemove
- Wyatt Smith
- Antho9364
- PCC600
- KTMpilot
- 450 Dakota
- Captain Jack
- Vashper
- Zinz
- 30.06king
- boris
- HeinSavage
- Kalthoff
- Smitty
- TarletonJake
- VIGILAIRE
- mark-hunter
- Jon Glajchen
- Certus
- WesRic404Jeff
- Grumpy gumpy
- teweye
- ThinusS
- DLSJR
- Parkerpusher
- Flbt
- EstherAMoore
- Trogon
- Katiethy
Forum statistics
Latest profile posts
Andrew62 wrote on Imac45acp's profile.
Hello,
Am I reading your post correctly to say that the Tsavo rifle will be coming out with a composite stock later this year? I ask because I had been looking very hard for a Tsavo, but if there is going to be a composite stock model I will wait for that.
Thank you for your time,
Andrew
Am I reading your post correctly to say that the Tsavo rifle will be coming out with a composite stock later this year? I ask because I had been looking very hard for a Tsavo, but if there is going to be a composite stock model I will wait for that.
Thank you for your time,
Andrew
1r4rc wrote on Corylax18's profile.
Saw your post. Nice. Denver too. Genesee area (just off 70) if ever up this way. Alternatively, do you have a membership at GGC? Whatever, you'll have a wonderful time in Africa. Enjoy.