Ruger Safari Magnum

Many feeding issues, especially in 416 Rigby caliber. Ruger have modified the claw. However main issue is extraction....operate the bolt at high speed such as under back up situations or follow up on DG with a scope fitted the empty case will hit the scope and drop back into the mag causing a jam......

Many of these issues arise again and again in proficiency tests.



Personally I prefer 100% reliability and for me the Ruger does not provide that.


I experienced the same issues with my RSM in .416 Rigby, but removing the burrs from the sides of the ejector and installing a heavier ejector spring cured the problem.
 
Quite so, Toby.......I may have misread.............thanks.........................FWB
 
I experienced the same issues with my RSM in .416 Rigby, but removing the burrs from the sides of the ejector and installing a heavier ejector spring cured the problem.

That is good information to know indeed!
 

Forum statistics

Threads
64,701
Messages
1,425,083
Members
132,138
Latest member
Danieluriasys
 

 

 

Latest posts

Latest profile posts

gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
 
Top