Prvi Partizan, Uzice - .458 Win Magnum and .458 Lott

Hunter4752001

AH elite
Joined
Sep 30, 2018
Messages
1,146
Reaction score
3,005
Location
Australia
Media
3
In a couple of recent posts it's become clear that many of our members find PPU brass to be quite good quality and definitely value for money. I use it for .375 H&H and 9.3x74R. Unfortunately PPU doesn't make cases in either .458 Win Mag or .458 Lott. That leaves supply options largely restricted to Norma or Hornady. Norma in particular is very expensive.

However PPU already make a number of cases based on the H&H belted magnum: 7mm Rem Mag, .300 Win Mag and .375 H&H Mag, This means they effectively have every thing need to produce 458 Win Mag & 458 Lott without significant additional tooling or processes.

I'm thinking it might be useful if those who are interested sent an email to PPU suggesting they add .458 Win Mag and 458 Lott brass to their product line.
The PPU email contact details can be found on their website: https://www.prvipartizan.com/contact.php
 
you mean Winchester no longer makes 458 Win Mag brass? Evidently they have really GTH.
 
For Serbian or ex Yugo hunters, the standard was, and still is in many cases: PPU ammo, for Zastava rifle.
However, in decades past, even in times when goverment had socialist planned economy, there was never 458 win mag ammo by PPU, despite the fact zastava produces 458 win mag rifle. And despite the fact that PPU produces 375 ammo. (and zastava makes 375 hh rifle)
So, good luck with that.

Another strange fact for large factory on international market (strange fact, at least to me), S&B does not make even 375 H&H ammo, and they do make a wide variety of calibers. Nor do they make 458 as well...
 
I believe grafs brass is made by ppu. I’d imagine a large enough order could convince Grafs to do a run of either
 

Forum statistics

Threads
64,516
Messages
1,420,725
Members
130,771
Latest member
RoslynLede
 

 

 

Latest posts

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top