Productive Trip to the Range - Heym 89b, and a Browning B-S/S?

frog stealer

AH enthusiast
Joined
Jun 28, 2012
Messages
451
Reaction score
551
Location
Naperville, IL
Media
5
Hunting reports
Africa
2
Hunted
South Africa
For the last few months, I've been testing many different loads for my 89 in 577 that require fillers...including R15, N140, and Varget. While I got respectable regulation with many of them, I decided to continue testing some that fill the case and do not require a filler. I tried 144 grains of H4831sc and both impacts were perfectly horizontal and only about 2" apart. Then I tried 145 grains and got what looks to be my go-to full power load using Woodleigh 750 grain weldcores, average velocity was 2042 fps, this group (circled) was shot off sticks at 35 yards:
pic1.jpg


To top off a great Labor Day weekend, I seemed to have found a great practice load as well, this one is 75 grains of IMR-4198 with open cell foam taking up the space and an accurate molds 590 grain cast bullet, average velocity was 1761 fps, also shot from sticks at 35 yards:
pic2.jpg


After I finished up with the Heym 577, I took my new (to me) Browning B-S/S out for a round of clays. I found a partial box of Federal 1oz foster slugs at the bottom of my large box of reloaded target shells, and decided to give them a go out of the Browning at 25 yards, just to see if they would even be close. The following picture surprised me, pretty good regulation for a shotgun choked mod and full if you ask me! These two shots were taken offhand at 25 yards, the other holes are where the wads impacted:

pic3.jpg
 
Nice work & great shooting !

I think you should have included a few photos of the rifle & the loads for us Gun Porn guys ?
 
For the last few months, I've been testing many different loads for my 89 in 577 that require fillers...including R15, N140, and Varget. While I got respectable regulation with many of them, I decided to continue testing some that fill the case and do not require a filler. I tried 144 grains of H4831sc and both impacts were perfectly horizontal and only about 2" apart. Then I tried 145 grains and got what looks to be my go-to full power load using Woodleigh 750 grain weldcores, average velocity was 2042 fps, this group (circled) was shot off sticks at 35 yards:
View attachment 631228

To top off a great Labor Day weekend, I seemed to have found a great practice load as well, this one is 75 grains of IMR-4198 with open cell foam taking up the space and an accurate molds 590 grain cast bullet, average velocity was 1761 fps, also shot from sticks at 35 yards:
View attachment 631229

After I finished up with the Heym 577, I took my new (to me) Browning B-S/S out for a round of clays. I found a partial box of Federal 1oz foster slugs at the bottom of my large box of reloaded target shells, and decided to give them a go out of the Browning at 25 yards, just to see if they would even be close. The following picture surprised me, pretty good regulation for a shotgun choked mod and full if you ask me! These two shots were taken offhand at 25 yards, the other holes are where the wads impacted:

View attachment 631230

Hey @frog stealer what primers did you use for the 577 NE loads?

HH
 

Forum statistics

Threads
63,340
Messages
1,393,343
Members
123,697
Latest member
AlannaScho
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on 0777446998
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top