SkullKeeper
AH elite
Does anyone have load data for the 425WR using H4350 ? Thank you !
World's most popular community & resource for hunting in Africa since 2007
Loads needed for 425WR using H4350
- Thread starter SkullKeeper
- Start date
Jefferry404
AH fanatic
Why 4350? As load is quite compressed and powder consumption
SkullKeeper
AH elite
I’ve not started loading anything yet but saw this listed in the Woodleigh manual.
Jefferry404
AH fanatic
Ah,
Do you use Quickload?
Do you use Quickload?
SkullKeeper
AH elite
No, I don’t have that program. I’ve got a good friend that loads RL15 in his 425’s and I have that powder also.
Jefferry404
AH fanatic
I thought would look into this cartridge (a guy on this forum wants to re-engineer the patented magazine clips, so that got me started on this
Anyhow, my practice is to use Quickload fitted to published velocity, psi data (had good results for other cartridges) and then apply that to a new cartridge lacking data.
Mr. Keeper wanted h4350. Lately, I have been getting into Staball6.5 (mostly for an upcoming 338-06 AI), so did that as well. Pierre van de Walt states that due it's short-fat case design, it is a natural for ball powders and the Staball6.5 results support this. The obligatory "anyone use this data at your own risk" ...
@SkullKeeper, here is the 4350. Now, QL, usually low on the bulk density, so filling ratio could be better.
For the staball, I measured its bulk density and use that here.
Anyhow, my practice is to use Quickload fitted to published velocity, psi data (had good results for other cartridges) and then apply that to a new cartridge lacking data.
Mr. Keeper wanted h4350. Lately, I have been getting into Staball6.5 (mostly for an upcoming 338-06 AI), so did that as well. Pierre van de Walt states that due it's short-fat case design, it is a natural for ball powders and the Staball6.5 results support this. The obligatory "anyone use this data at your own risk" ...
@SkullKeeper, here is the 4350. Now, QL, usually low on the bulk density, so filling ratio could be better.
For the staball, I measured its bulk density and use that here.
SkullKeeper
AH elite
@Jefferry404 thank you for the research and insight on this !
Members online
- TSALA HUNTING SAFARIS
- AfricaHunting.com
- Safariman5000
- Wes350
- jennylockl
- Killo
- Beethoven
- KMG Hunting Safaris
- Rigby375
- realsamthompson
- russ473
- Woodcarver
- Sanglier14
- RANCHERO Outfitters
- spike.t
- HoosierHunter
- Charlie64
- Ray B
- Tanner
- yumastepside
- TexasTB
- omvidisi1970
- Kris Thomassen
- Monstermuley24
- ARHinAK
- jnelson
- leslie hetrick
- UKHunter
- Flipper Dude
- N1c0la5
- Joebliksem
- HannuS
- TwoTracks
- krish
- John J
- reinwood
- Carson
- pinotguy
- Gomer
- congniflous
- BryceM
- Odinsraven
- pilar
- Carcajou
- SaintPanzer
- Robmill70
- quaidwolfe8
- RedTag
- hardrockconcretecoatings
- CloudySkies
Forum statistics
Latest posts
-
-
-
South African Safari The Way You Haven't Experienced It Before- Latest: RANCHERO Outfitters
-
Latest profile posts
USMA84DAB wrote on Steve-O's profile.
I have one of each (Ruger Alaskan Bush Rifles) new in the box - just waiting for someone to take them off my hands...
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.