Ithaca 278693 T

Rickmt

AH fanatic
Joined
Nov 23, 2017
Messages
924
Reaction score
1,743
Location
Belgrade, MT
Media
92
Hunting reports
Africa
4
Australia/NZ
1
Member of
SCI, NRA
Hunted
SA, NZ, Montana, Maryland , Georgia , Mississippi, USA
A good friend of mine here in Montana just received this single shot trap gun from his elderly father . He really wants to know anything that you can tell him about his gun . His research leads him to believe it is a 5E , but that does not appear anywhere on the gun . There is a 6 in two different places on the gun . Perhaps it is a 6E ? Serial is
Image1657912700.712476.jpg
Image1657912720.849562.jpg
Image1657912734.228820.jpg
Image1657912750.920639.jpg
Image1657912773.086098.jpg
Image1657912794.409816.jpg
Image1657912826.296479.jpg
 
If he wants the full skinny, his best route would be to contact the Buffalo Bill Center in Cody, Wyoming. Walt Snyder donated all his Ithaca factory records to them a few years ago. They should be able to send him a factory letter.
 
Thankyou sir for that info. My friend actually lives near Cody in Belfry , Mt and can drive there in 35 minutes. Great help thanx
 
Thankyou sir for that info. My friend actually lives near Cody in Belfry , Mt and can drive there in 35 minutes. Great help thanx

Fantastic.

He might get lucky and find out that pretty gun has someone interesting attached to it. Too bad some trapshooter had to rape it's butt.
 
Marc ret please explain what you are saying!
 
Marc ret please explain what you are saying!

The spacers between the recoil pad and the stock. The gun must have been owned by a very tall man. Easily corrected as the stock itself looks to be original length.
 
Thanx for the info WAB !
 
  • Like
Reactions: WAB
Can anyone say what model this gun is and what it’s value might be?
 
Any Ithaca enthusiasts out there ?
 
According to Ithaca: SN is from 1917.

Should be an Ithaca 6E Flues (about 94 made). It’s the second style, when the crossbolt was added, but not a knickerbocker (post 1922).

Why I suspect 6E and not 5E:
1658853975284.png


Seen them go from 2-5k.
 
Last edited:
Thank you sir - much appreciated
 
The workmanship on these Ithacas was impressive, to say the least. One member of the local trap club on occasion uses his Ithacas, one of which is a 6E. I have not seen him this Summer, so did not get a chance to talk with him. The Knick's are pretty easy to identify, but this is also a work of art.......thanks for posting the eye candy........FWB
 

Forum statistics

Threads
68,690
Messages
1,528,577
Members
156,205
Latest member
lemoremu1977
 

 

 

Latest posts

Latest profile posts

Stnelson wrote on Never Been's profile.
I want one of the stocks.
buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top