I just added another 416 caliber to the battery - a 416 Van Horn

[buckstix]

I just added another 416 caliber to the battery - 416 Van Horn

Well, I just bought the 416 Van Horn custom rifle built by Walter Abe. 416 is my favorite caliber.

It just so happens that I have a custom wildcat rifle chambered in 416 MRE from 1972 (Mid Range Express) ... that's the same caliber as the 416 Van Horn that Gill Van Horn invented in 1977. Its a 460 Weatherby Mag case shortened to 2-1/2" and necked down to .416 cal. Its basically a 416 Weatherby Mag "short".

as always comments are welcome ... and any info about Gil Van Horn or Walter Abe would be appreciated.

http://www.buckstix.com/buckpics/abe-000.jpg

 

[buckstix]

I just received the rifle in hand and found it had these bases. Does anyone know what rings would fit these bases?

http://www.buckstix.com/buckpics/abe-bases.jpg

 

[Wyatt Smith]

Sure is a nice looking rifle. The cartridge is interesting and would seem to be useful.

 

[Zinz]

I had that rifle in my watch list...among so many I watch. It looks even better in your pictures; the color case hardening is very good.

Not entirely sure, but those scope bases look similar to a Unertl base. I just did a quick Google search and found some that look like yours....Unertl made bases in several styles and yours look like one style, anyways.

Very nice rifle,

Ed Z

 

[buckstix]

thanks - I have dozens of Unertl bases and those bases are much more narrow - these are much wider at .650 width

 

[Moosemind]

I just got this scope and the dovetail is .65". EAW made.

 

[Zinz]

With no locking mechanism to keep the scope from moving on the base, I'd be hesitant to use those bases on a heavy-recoiling rifle (though it seems the front base has an oval recessed area that could have been a locking lug on the front ring?) Who knows. The Unertls I've used on Win 52s have a groove where the scope rings clamp onto to keep the rings from moving... but that is just a .22LR.

Regardless, hope you sort it out,

Ed

 

[buckstix]

I just ordered a set of 16mm Warne Lever QD Rings for the 527 CZ. Those should work. They have a recoil stud to keep them in place under heavy recoil.

 

[buckstix]

I found that the front scope base has a small ledge that hangs over the action with a large set screw that keeps the base from moving forward under recoil. This takes the load off the 2 screws that hold the base. I purchased a set of 16mm Warne QD Lever rings that worked great on the 2.5x32 scope that I now mounted. This allows for quick and easy "on-off" scope and iron site swapping, as needed. Field tests with the scope to follow.

Here is a picture of the 416 Rigby cartridge next to a 416 Van Horn cartridge. With modern powders the 416 Van Horn can equal original 416 Rigby performance.

And a picture of a target using the iron sites. This is a fun "puppy" load for practice.

And finally a picture of the mounted scope showing the overhang base. If you look close you can see the large set screw.


http://www.buckstix.com/buckpics/RIGBY-VAN-HORN.jpg

http://www.buckstix.com/buckpics/abe-targ.jpg

http://www.buckstix.com/buckpics/abe-scope-0.jpg

 

[Edward Weigel]

That 416 Vanhorn looks like my 416 Taylor what’s the power difference would like to know

 

[Slickshooter]

Atta boy man, the ol 416 Van Horn. Never heard of it till now. Very interesting

 

[buckstix]

There is little difference ballistically between the 416 Taylor, or the 416 Van Horn, or the 416 Rigby. All launch a 400 projectile at 2400 ft/sec. Both the Van Horn and the Taylor can use a standard length action, whereas the Rigby requires a magnum length action.

 

[Grumpy gumpy]

I missed this,.
That’s one lovely looking rifle, the grain flows nicely
Gumpy

 

[John Telford]

Nicely put together rifle. M98 Action so you can’t go wrong!