Hornady 30cal on PG

CZDiesel

Gold supporter
AH elite
Joined
Dec 21, 2016
Messages
1,134
Reaction score
3,470
Location
Colorado Springs
Media
9
Articles
1
Hunting reports
USA/Canada
2
Hunted
United States
Looking for thoughts and those who have used Hornady 180gr SST and/or Interbonds on plains game in Africa. I have both and am looking for a designated PG round for my 300 H&H. Kudu will be the largest of the PG on this upcoming hunt. Anything larger the 375 will take with 300gr TBBC’s
Thank for your insight…
 
I have found the SST to be softer than just the standard SP and of course the interbond. I limit the SST to Texas whitetail personally.

I have used a 180 grain Hornady SP out of a 06’ to take a Hartmanns zebra Stallion. 175 yards give or take - Shoulder shot dropped him dead.

I would not hesitate to use that combo again on plainsgame. Moderate velocity is key and I think a 300h&h would be fine.

IMG_0925.jpeg
 
The Interbond were a great bullets but were discontinued. I wish I had bought more when they were available. Here is a picture of a 154 grain Interbond out of a 7mm magnum on a large bodied mule deer.
IMG_0109.jpeg
 
Ditto on what @DG870 said. I used the 165 grain on 400lb - 500lb cow elk from a .30-06 w/o issue.

All I can figure is Hornady decided to get out of the bonded bullet business, that is until the DGX made an appearance, and they then backpedaled and made it bonded.

I still hoard a small pile of those 165's...
 
I had the opportunity to reload SST 180 gr in Africa for my .300 Winchester magnum. It was the only bullet available on the farm and I used Somchem 385 powder. I shot several wildebeests and a kudu. They worked well, even pretty far, but even at distance, this bullet is really fragile like the Nosler Ballistic-Tip I also used later.
I recovered one SST in a black wildebeest shot at 400+ yards and the lead core was out of the jacket.
If I have the choice, I would prefer the Interbond over the SST.
 
Back in 2010 I used a 150 gr Interbond out of a 30-06 for my Dall sheep at around 100 yards. I shot it quartering away, hitting everything vital and stopping on the far shoulder. It expanded beautifully, and retained something like 80% weight as I recalled. As you can guess that sheep went nowhere. I'd compare them to the Nosler Accubond. The 180 with 300 H&H velocity would be deadly. If you have them, use them with confidence IMO
 
Last edited:
I believe the Interbond has been replaced to a certain degree by the Hornady ELD-X line. I have used SST's extensively here in the states for whitetails and they are deadly. I would however have concern using them on PG. I have used the Federal Trophy Bonded Tipped (old Bear Claw design) as a bonded bullet, exceptionally accurate and weight retention when recovered is ~80%. Picture attached I think they are the best of both worlds. Also, the Barnes TSX and TTSX line has had wonderful results.

Screen Shot 2025-01-16 at 4.24.00 PM.png
 
Last edited by a moderator:

Forum statistics

Threads
62,734
Messages
1,377,974
Members
120,965
Latest member
JonahBruns
 

 

 

Latest posts

Latest profile posts

jbirdwell wrote on Jager Waffen74's profile.
Sir, I will gladly take that 16 gauge off your hands. I was waiting for your Winchesters but I'm a sucker for a 16 ga.
DaBill wrote on liam375's profile.
This is Bill from Arizona. If you still have the DRT's I would like to have 3 boxes
Let me know about pmt.
Thanks
teklanika_ray wrote on SP3654's profile.
I bought a great deal of the brass he had for sale, plus I already had many hundred rounds.

How much brass are you looking for?

Ray H
DaBill wrote on Green Chile's profile.
Hi Green Chile, I just recently bought a 470 NE barrel for my Thompson Center TCR 83-87 single shot. Im just looking for some 470 NE to shoot at the range just to try it out. I dont need anything special but I just wanted to see what you have left. I dont necessarily even need a full box.
Thanks
Bill
Harleydav wrote on raamw's profile.
Hello Do you still have 50 new 458 win mag brass for sale and are they hornady ?
 
Top