guns and rust

larry4831

AH fanatic
Joined
May 26, 2015
Messages
529
Reaction score
406
Media
5
Member of
NRA
what is the lowest temperature that you can store guns without having to worry about rust.
 
If I am not mistaken, temperature (in and of itself) has nothing to do with rust......it's humidity. And if a gun is properly protected with rust inhibitors, then the point is moot.
 
If I am not mistaken, temperature (in and of itself) has nothing to do with rust......it's humidity. And if a gun is properly protected with rust inhibitors, then the point is moot.
thank you Mr 16 gauge
 
A few degrees above the dew point. Where ever you are.

There are reasons why rifles were "packed" in grease to ship them. (as noted above) :)
 
There are reasons why rifles were "packed" in grease to ship them. (as noted above) :)

Oh? I thought they were packed in grease to make the bullets come out faster. (For those of you who've seen the movie Sgt. York, with Gary Cooper, you'll understand what I'm talking about......;))
 
Thanks, the humidity is 36% and the dew point is 41 degrees
 
Oh? I thought they were packed in grease to make the bullets come out faster. (For those of you who've seen the movie Sgt. York, with Gary Cooper, you'll understand what I'm talking about......;))

Funny.

Can you video tape this one for me.
Please pull the trigger remotely. I do not want to actually witness the human carnage.


Thanks, the humidity is 36% and the dew point is 41 degrees

It will change throughout the year on a constant basis.
Condensation will occur. That is the enemy. It forms when the temperature of an object drops below the dew point temperature.
So, constant temperature above that point will help.

Good luck.
 
Poison serpents and politicians are the enemies of humanity.
Rust and politicians are the enemies of firearms.
 
Get some Poly Bags and place the firearms in them. They are made for use with firearms and have a VCI embedded in them to protect the firearms. I also got some VCI chips from www. theinhibitor.com to add to them. Inhibitor also make an oil(spray or wipe on) that is good for firearms. You will have no troubles. They are used for long term storage and have easy to open closers so you can remove/replace firearms in them as often as you want. I have had some pistols in them for 7 years so far. They look as good as the day I put them in.
The other nice thing is no dust on them and no grease to make a mess with or to have to remove to use them.

One of the smartest things I ever did besides divorcing my now ex wife.
 
Here is the segment I was talking about (from 2:48 to about 4:05).

 
yes, I understand that humidity and temperature will change. I just put up yesterday as for an example. but the humidity has been very low here about 30 percent which is a good thing. thank you all.
 
You can buy impregnated gun socks for little money which claim to keep moisture at bay.
I use one here in the UK for my rifle. Clean as normal, slip the sock over it and put in cabinet. Keeps the gun clean, dust free and helps prevent knocks and damage.
 
Last edited:
Technically, metal will rust faster as the temperature increases but the goal should be not let the rust start in the first place.

Besides what people have said keeping down the humidity, it's also good to coat the metal in a little bit of oil. This keeps the oxygen and moisture away from the metal.
 
A gold stick in the safe keeps it just a tad warmer than the ambient air temp outside of the safe. However, nothing beats oil, Rem oil is what I prefer. (Waiting for the remington haters club)
 
A gold stick in the safe keeps it just a tad warmer than the ambient air temp outside of the safe. However, nothing beats oil, Rem oil is what I prefer. (Waiting for the remington haters club)
Sign me up!
 
I want to thank you all, my guns do not have any rusand that is the way I would like to keep it. I use to live in pennsylvania where in the summer it would be in the high ninety's and so would the humidity. Now I live in alaska and the humidity is surprisingly low sometimes and the temperatures get very cold and I keep them in the garage that I try to keep at least 60 degrees in the winter
 
A few degrees above the dew point. Where ever you are.

There are reasons why rifles were "packed" in grease to ship them. (as noted above) :)
Exactly. If it's metal it needs some rust protection in all but the very driest of environments. Even stainless isn't completely "stainless".... . But it sure does help!
 
I use a product called eezox. It goes on thin and dries to a non oily film that also lubricates. I use it before going hunting to keep copper fouling down on guns that copper quickly.
 
A gold stick in the safe keeps it just a tad warmer than the ambient air temp outside of the safe. However, nothing beats oil, Rem oil is what I prefer. (Waiting for the remington haters club)

Just call me a 'PTFE in suspension' hater! :)

It would be completely un-PC to heap abuse on those poor deluded souls who believe that the Remington Model 700 is the Alpha and Omega. :D :A Stirring: :D Beers:
 

Forum statistics

Threads
68,170
Messages
1,515,453
Members
151,145
Latest member
THRCerys24
 

 

 

Latest profile posts

USMA84DAB wrote on Steve-O's profile.
I have one of each (Ruger Alaskan Bush Rifles) new in the box - just waiting for someone to take them off my hands...
blackdog001blackdog001 wrote on Snowball's profile.
Hi. I can take 5 boxes at $200 shipped if interested. Thanks
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
LRich wrote on Andrew62's profile.
Andrew, I commented that your on 375 H&H for sale was the fair price.

Like I commented, my classic stainless has the original 24” barrel.

Did you buy yours with the barrel already cut down to 21” or did you do it (or a gunsmith)?
 
Top