Great Practice Target For Buffalo Hunting

DLSJR

AH fanatic
Joined
Apr 6, 2019
Messages
933
Reaction score
4,406
Location
West Coast
Media
33
Hunting reports
Africa
2
Hunted
Zimbabwe, Botswana, Zambia, South Africa, Tanzania, Cameroon, Canada, Alaska & every western state except Washington
As my son and I prepare for our upcoming hunt in the Selous, we’ve been out shooting our 375’s & 416. Usually we practice off Gunstix (which are excellent, if you haven’t tried them) at 50-100 yards. Today we changed up a couple things, going from a standard ‘Shoot & See’ bullseye target to one of the Safari Press Cape Buffalo targets. We also shot offhand from a bit over 40 yards (because I forgot the Gunstix at home!). The buffalo target is probably 75% of life size and on the back side it has the organs drawn so you can see what your shots hit. We didn’t get the target on the plywood quite right, so left the head off, but the important section with the chest was on the plywood. Here are a few pictures of our headless Cape buffalo and results. I highly recommend these targets. If you’re headed to Africa to hunt buffalo, these targets will help you prepare.
IMG_0336.jpeg
IMG_0339.jpeg
IMG_0343.jpeg
 
A very good training setup. A couple of questions. What's the overall dimensions and the preferred thickness of ply? Also how do you see the reverse side, showing the organs, if the target is stuck to a plywood backer?
 
A very good training setup. A couple of questions. What's the overall dimensions and the preferred thickness of ply? Also how do you see the reverse side, showing the organs, if the target is stuck to a plywood backer?
The way I built ours is using 1x2 for the entire frame. Then I stapled cardboard as a backer over the entire frame EXCEPT the vital viewing area.
Target panels are tacked to front.
Simple, light and only requires walking to the rear of the target to see whats what.
 

Attachments

  • Screenshot 2023-07-31 at 1.33.24 PM.png
    Screenshot 2023-07-31 at 1.33.24 PM.png
    1.4 MB · Views: 172
  • Screenshot 2023-07-31 at 1.33.26 PM.png
    Screenshot 2023-07-31 at 1.33.26 PM.png
    494.4 KB · Views: 161
The way I built ours is using 1x2 for the entire frame. Then I stapled cardboard as a backer over the entire frame EXCEPT the vital viewing area.
Target panels are tacked to front.
Simple, light and only requires walking to the rear of the target to see whats what.
BnC 04 is smarter than me, for a couple reasons…. #1 he made a much better target holder than me as we just used an old sheet of 3/8” plywood I had laying around. I like his target holder way better! And #2, he actually got his entire target on the frame. :ROFLMAO:
 
I hung a archery bag target behind the cardboard target
 
No matter how fancy or simple a paper target may be, it is 2 dimensional. For hunting shot placement and bullet track on any big game, you have to think in 3 dimensions. For buffalo or large animal practice, I just use a plain, large black bull on a paper target or a large paper plate, spray painted black, on a piece of cardboard. I practice from about 25 yards to no more than about 100.
 
Just got the buffalo and kudu targets. Very good people to deal with. Arrived in 2 days. These targets are impressive.
 
  • Like
Reactions: RLL

Forum statistics

Threads
60,941
Messages
1,331,784
Members
113,659
Latest member
c54rent
 

 

 

Latest posts

Latest profile posts

Just did a podcast, check it out if interested!

Cowboybart wrote on Yukontom's profile.
I read an older thread that mentioned you having some 9.3x64 brass. Do you still have some? I am looking for 100 pcs, maybe 200.
A wonderful trip to Hungary with a very special friend !
# Mauser M12 Extreme
# Norma TIPSTRIKE .308 Winchester 170gr


IMG_0268.jpeg
IMG_0319.jpeg
 
Top