fast twist 270 Winchester

update on the loads.

went to the range to creep up on max or near max using Magpro and 150 ABLR.

i changed the chamber since last try. with the .600" throat the bullets touch up at 3.89" COL.

this lot were seated at 3.50" COL giving .390" freebore.

so now the data. my starting load was 55 grains of Magpro to 62 grains of Magpro.

the speed started at 2550 for the 55 grain load. at 62 grains it shot at average 2989fps. no pressure issues. i loaded 61, 61.5, 61.7, 62. 1.25" groups with no center dot.

berger sent me load data for my setup and 170 EOL using AA4350 and Magpro.
 
Sounds about right I've been getting 3020 fps out of my 270 with 150g Partitions using 58.5g of H4831 forever. This might be too hot for some rifles so please start low and work up checking for pressure signs. BTW I have an 80s vintage Mark V in 270 Weatherby and I'm interested in a 1 in 8" twist barrel see how fast I could make those 165g ABLRs go :)
 

Forum statistics

Threads
64,670
Messages
1,424,094
Members
131,776
Latest member
DiannaFlou
 

 

 

Latest profile posts

cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
 
Top