Factory Mauser Sporter?

Zinz, I don’t know why Americans dislike the 9X57 - most likely because of ignorance of what a fine cartridge it is for North American Game.
I have a very nice TypeB in 9mm and had it for sale a while back and virtually nobody had any interest in it even when priced lower than any other ‘B’ on the market at the time.

I like to share the specs on some of the sporting cartridges of the era to help them understand the competence of the 9X57.
See, 3gr lighter bullet at 66fps faster than the 318WR wonder cartridge!!

View attachment 618990
This American loves the 9x57!!!
 
I finally got a picture of the marking on the receiver. Does this tell you experts anything?
1000005926.jpg
 
I believe it's early enough that it will use the .318" bullets.
 
It not an Obendorf its a mod 98 Husqvarna Mauser, US value for one in that condition about $800 to $900, some are in 9,3x62 and some in 9.3x57 and some are punched out 57s to 62, lots of rough ones available..I have several exactly like yours. Lots of configurations of them..Good rifle if its 98 like yours, the , the 96s that it that it comes in is less desirable and not of the same quality..
 
Why would a 9.3 (.366) be a .318?? It has a .366 bore.
 
The rifle in question is a Oberndorf Sporter, marked 8,0n. My understanding from reading up on these rifles is that they had a .320-.321" bore which could handle the .318 and .323" bullet.
 
I suspect one of us is confused, the rifle in queston pictured first is said to be a 9.3x62 by the poster which would be a .366 bore and it is a Husqvarna( 98 Mauser action),,..The 8x57 would be either an early .318 and later a .323???????
 
The first picture posted was the complete rifle, the now existing picture is action only and not the same rifle...and is an Obendorf and your correct it is a 8x57 .318 or 323..

the op is confused Im thinking or something is amiss..
 

Forum statistics

Threads
65,507
Messages
1,446,114
Members
136,621
Latest member
NellLsd516
 

 

 

Latest profile posts

Woodcarver wrote on RAVEN ROCKS PRECISION's profile.
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
No Promises wrote on swoobie's profile.
X5i scope is perfect - thanks for an easy transaction! Buy with confidence.
Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
Ray B wrote on JMJ888's profile.
I am righthanded, so not interested in the rifle, but I have a 375 RUM and 350 gr bullet loading data is very hard to come by. If you could reply with information regarding your loads I would greatly appreciate it. Thank you, Ray Boone, Leavenworth, WA
mcr wrote on gbflyer's profile.
Hello - I was looking at your post from several years ago regarding the Winchester 300 H&H. Any chance you still have the lefty M70 300 H&H for sale?
Thank you, Mike
 
Top