CZ550 getting upgrades

[Nhoro]

You will end up with a fantastic rifle for not much money. The factory trigger tunes up very well. A little polishing of the surfaces and adjusting out the set trigger is easy. Then it can be adjusted to a reasonable weight and crisp break. I would also suggest a threaded bar reinforcement in the wrist. Mine has just the recoil lugs bedded and is good so far.

 

[Cowboy777]

Awesome

I have extensive experience with the CZ 550 (.375 H&H, .416 Rigby, .458 Lott, custom .300 Wby on the double square bridge action) and once they are tuned-up they are every bit as good as the rifles Rigby built on their action. Although admittedly less glamorous... But considerably less expensive...

I would highly suggest:

1. straightening and filling the bolt handle
2. replacing the CZ set trigger with a direct trigger (e.g. Timney)

Wayne used to include upgrade #1 in upgrade #2, so I am "assuming" that Tim does the same and that this is included

I also like a jewelled bolt

As far as the stock goes, the problem with the CZ stocks is that they are notorious for cracking at the wrist because they are generally not made from high quality i.e. old i.e. dense wood and bedding will not change that . Have you considered a Bell & Carlson? I know that they change the looks, but a kevlar/full aluminum bedding block stock is virtually indestructible...

Yes, it includes the bolt handle and I believe the trigger will be a timney.

 

[Atticus]

Is there a specific reason for straightening the bolt handle on the 550?

 

[colorado]

Yes, it includes the bolt handle and I believe the trigger will be a timney.

I don't know what type of single stage trigger Wayne put in my CZ550 but it's perfect. Breaks at a crisp 2 1/2 lbs Not for the uninitiated with my 500 Jeffery