Chrony Issues. Any Suggestions On How To Fix This?

I can imagine the read out:
HOLY S#!T
Hard to get an average though

 

My issues with that device is that you can't do speed and accuracy at the same time because hanging a weight off the barrel affects barrel harmonics and accuracy. For speed only they are fantastic

 

Don't think for a second that you can't shoot a Magnetospeed, do I have to post the proof?

 

One of the benchrest shooters at the range I shoot at shot his Magnetospeed. Created a nice new channel about halfway down the unit.

 

It think it was more like "Ouch! That's going to leave a mark!"

 

Your friend should have taken more care to align the unit parallel to, and about 1/4" below, the bore axis at the time of setup. Also, the unit tends to work loose and misalign with shot impacts. He will have to buy a new unit - what else can be said?

 

Yes he said he messed up. Something to do with the barrel switch he did. Changed the alignment slightly.

 

Yea Buddy

 

That's why I use a pact, at least if you hit it you don't blow your computer to pieces

 

If I could find them, I'd post a pic of the first set of cardboard aiming frames from my chrony- I taped the things back together a few times. there were some real close misses.

 

I was thinking it was about an inch high at three feet

 

Not quite as extreme, but I beat mine up with gas checks that fell off of cast bullets in flight. Mine still works, but it isn't as pretty as it came out of the box.