caliber question

blkpowder50

AH senior member
Joined
Oct 15, 2013
Messages
54
Reaction score
1
this is just a question. im not trolling,im not planning on using this in Africa, i just want to hear from experts. a double rifle expert told me in the pre nitro days a hardened 8 bore ball at 1500 fps was deadly to an elephants head with a frontal brain shot.. On that statement, i ask my question. A souped up rifled 20 gauge slug gun i know will push 700 grain/.550 CEB bronze solids at 16-1700 fps/over 4000 ft lbs.. Due to the smaller diameter,decent sectional density, and faster velocity than what the old 8 bores used to do, do you think a .550/700grainer going 1600 fps would penetrate an elephant for a frontal brain shot? Im asking because im impressed at the souped up 20gauge, and am just curious if that load would do the trick.

As i said, this is just a question. If I was going to Africa id take the Lott.

thank you for your time and patience with questions about a load.
 
Well if you say it's over 4000 ft-lbs them I think it could work.
 
thank you for your reply. it was never intended to be taken to Africa, its just interesting to know a custom built heavy barrel 20 gauge rifled shotgun based on an over 120 year old bolt action can be made to produce such ballistics. Not bad for a 20 gauge. thank you again.
 
I grew using a shotgun. Back in the day they didn't have the best bullet options but with all the advancements they are a serious weapon.
 
Blkp50

The cartridge that Sir Samuel Baker made popular 130 years ago was very similar in performance to the 20 bore that you have described. His .577 Express fired a 648 grain hardened lead bullet at about 1650fps when driven by 167fg black. This is a 24 gauge, and there are numerous examples in the old African literature of elephant being killed with a single shot to the head by this gun and load (see Neumann's Elephant Hunting in East Equatorial Africa...."to my great joy and relief, she fell dead....."). I also know from many volumes on elephant hunting, that this load was not generally considered adequate for elephant : "...it should have been at least a 10 bore"...JA Hunter...."Hunter".) Still, they did not have machined bronze bullets back then..................FWB
 
I don´t know a thig about the elephant... but, intrinsecall ballistic don´t mess....
This density, plus this vellocity, makes a very powerfull shot!... Without deformation... the bullet cross away anything!! INCLUDED the elephant!
 
I agree, Marcos......no living creature could withstand a well placed shot from that load.......FWB
 
Ok!!! and in the early time of the "safari", all the "big five" was hunted by big shotguns using black powder and calibers like nro. 2 o 4.... WHATH A CANNONBALL.... Terrific shots... and very dangerous to the hunters too!... This cartridges shows the way to the later calibers used in the ends of the 1800 and 1900... the smokeless powder take a big hand too!
 

Forum statistics

Threads
64,702
Messages
1,425,134
Members
132,189
Latest member
MinnaPullm
 

 

 

Latest profile posts

gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
 
Top