Blaser 375 w/suppressor

[gearguywb]

Has anyone had their 375 R8 barrel threaded, and used a suppressor? Thoughts?

Just kicking ideas around....

 

[Challer]

Not a Blaser, but an H&H. Works great.

 

[Hunting Hitman]

Have this setup for my wife and it greatly reduces the recoil.

HH

 

[gearguywb]

Have this setup for my wife and it greatly reduces the recoil.

HH

Thank you. What suppressor are you running?

 

[uplander01]

The Blaser platform would be the right one to do it on, with current suppressor technology it could be done in a relatively compact package.

 

[Hooknbullet2]

Yes, I had Tip Burns thread mine. I use it with my Thunderbeast Magnus suppressor.

It’s a great combination.

 

[uplander01]

Looks like Blaser makes a threaded 375 HH barrel, I'd sell the standard and buy the threaded....I'd be apprehensive about have someone else thread a Blaser barrel.

 

[WC86]

Yes, I had Tip Burns thread mine. I use it with my Thunderbeast Magnus suppressor.

It’s a great combination.

Which contour and what threads?

 

[Hooknbullet2]

Standard contour and 5/8x24 threads.

 

[MacJenkins]

Looks like Blaser makes a threaded 375 HH barrel, I'd sell the standard and buy the threaded....I'd be apprehensive about have someone else thread a Blaser barrel.

Why? I've had numerous blaser barrels threaded. Blaser USA does it out of Texas but quite expensive. Had Unknown Munitions thread two for my kids last year.

 

[gearguywb]

Tip did a barrel for me as well. Good work and fairly quick turnaround time

 

[WC86]

Standard contour and 5/8x24 threads.

Intriguing. Did he add a shoulder?

Depending on how your suppressor is attached it may not matter, just curious

Also, may I ask the length of the finished barrel?

 

[Hunting Hitman]

Thank you. What suppressor are you running?

Mine is using a Bowers Suppressor that works well.

HH

 

[Hooknbullet2]

Intriguing. Did he add a shoulder?

Depending on how your suppressor is attached it may not matter, just curious

Also, may I ask the length of the finished barrel?

Here are some pics for you with the thread protector on it.

 

[WC86]

Here are some pics for you with the thread protector on it.

Very cool. I was hoping this was what he did in this case

Thanks very much for the photos. I’ll need to reach out to him soon

 

[Ndczerwinski]

I just tried a supressor on my Gunwerks Skuhl in 375 Ruger and it was awesome.

The supressor is a Dead Air Primal and my rifle has a 21” barrel.

The supressor cut the recoil to 30-06 level. It was also quiet enough to shoot with no hearing pro and no ringing ears.

I have been thinking real hard about getting a 375 H&H barrel for my R8 in a semi-weight contour then having it cut down to 20” and threaded 5/8” at Mag-Na-Port. They did three R8 barrels for me and all turned out great.

I could also go with a std weight but then I would be at 9/16” and have to change the rear end of my Primal around.