rdog
AH elite
- Joined
- May 25, 2021
- Messages
- 1,150
- Reaction score
- 3,514
- Location
- sunshine coast QLD Australia
- Media
- 18
- Member of
- SSAA
To cut a long story short about 20 years ago a bought a Ruger 77 mk2 Target in 22 PPC wanted a 6PPC but they were all sold as i have a 222 & 223 the 22 PPC did not get a lot off use , i decided to re barrel to 6 PPC & ord a barrel from Allan Swan, a stainless 1-10 twist profiled as per the Ruger whilst waiting looked at some new 6mm PPC brass & dies all very expensive .Then i discoverd the 6 mm ARC hornady ammo & brass at realistic prices & Swan had just got a reamer in 6 ARC problem the 6 ARC factory ammo is all 100 grain + 1-10 twist would not stabalize those bullets as at this stage the Barrel was made so i was stuck with 1-10 twist , having no intentions of shooting bullets of 100 grain + i decided to go ahead & use 70 g to 90 g bullets as i would if it was in 6 PPC . i bought 40 Hornady 108 grain factory ammo & tried 2 at 100 meters they went through the target sideways, pulled the bullets & used the brass & as brass is in very short supply made 100 out of Starline 6.5 Grendel a very easy process . the rifle shoots like a dream all bullets tried 70 to 88 grain shot sub moa . attached is a target 100 metres with 88 grain Berger fbv with 27 grains of AR 2206H reformed Starline case & Rem primer.