470 Capstick

Roberto Mervicini

AH member
Joined
Aug 26, 2022
Messages
20
Reaction score
29
Location
Laval, Quebec, Canada
Member of
club de Tir Ville St.Pierre
Hunted
S.A., Canada
Hello Gentleman's, any out there using this cartridge? (470 Capstick )
I wold like to have some idea in regard to hand-load with 500 grain bullet. Have on hand the following powders: IMR 4350,4831,3031, 4895, H1000, Retumbo and N150.
Also i am looking to buy a set of reloading dies and a chamber reamer if some one have it and like to sell it.
Please contact Roberto either trough the site or via e-mail [redacted]
wishing every one a wonderful day Best Regards,thanks
Roberto
 
Last edited by a moderator:
I've not heard that caliber mentioned for a long time. Looking forward to hearing responses.
 
I've not heard that caliber mentioned for a long time. Looking forward to hearing responses.
Hi Sir, just ordered a custom barrel and got a P17 action, i will build a rifle and now need reamer and reloading die brass if i cant find i will use .375 HH fire form....then i am in business!!
 
Hello Gentleman's, any out there using this cartridge? (470 Capstick )
I wold like to have some idea in regard to hand-load with 500 grain bullet. Have on hand the following powders: IMR 4350,4831,3031, 4895, H1000, Retumbo and N150.
Also i am looking to buy a set of reloading dies and a chamber reamer if some one have it and like to sell it.
Please contact Roberto either trough the site or via e-mail [redacted]
wishing every one a wonderful day Best Regards,thanks
Roberto
I have not fired my 470 capstick all the load data is from A Square load data manual Any Shot You Want. That only talks about jacketed bullets and solids.
Krish
16633743175716081878523737695034.jpg
 
Good Morning Krish,
thanks for your replay, that will give me a good idea how to proceed... now need to find reamer and die... talk to makers and was told 2 years delay to make me one !!! so i am still hoping to find a use one some how!!!
In regard to cast bullet I made a 45/70 using a Siamese Mauser action and if fire 350 grain hard cast gas check at 2260 fps without signs of pressure almost the same as jacket bullets and no barrel leading !
Well thanks again, best regards
Roberto
 
I’ll see what I am loading. It’s a good caliber for sure. Qual-Cart has or had some brass. If they don’t, let me know, I ordered some extra last time I got it.
 
I’ll see what I am loading. It’s a good caliber for sure. Qual-Cart has or had some brass. If they don’t, let me know, I ordered some extra last time I got it.
Good Day Glenn, I look every were and it look like all are out of stock or back-order, I could use 2 or 3 boxes of 470 Capstick if you have it to spare... if ok with you I have one address in Champlain NY and I could send you the money via Western Union for us Canadian this is the best way to pay outside the country.
Please let me know, Best Regards
Roberto
 
Good Day Glenn, I look every were and it look like all are out of stock or back-order, I could use 2 or 3 boxes of 470 Capstick if you have it to spare... if ok with you I have one address in Champlain NY and I could send you the money via Western Union for us Canadian this is the best way to pay outside the country. if ok please let me know if you could help and the number of box you could part +shipping cost, need your adress and i will send you the $$ and the Champlain N.Y. adresse to ship once you gor the $$
Please let me know, Best Regards
Roberto
 

Forum statistics

Threads
67,246
Messages
1,491,774
Members
144,690
Latest member
MaricelaHu
 

 

 

Latest profile posts

channelkat wrote on NMAmateurHunter's profile.
FYI we need NM members! Please spread the word and join us if you can make it.
1775843806328.png
observe wrote on NZ Jack's profile.
Jerome, do you think my last post in rough camping must maybe shift as an article?
rayford445 wrote on Hunter-Habib's profile.
Good afternoon,

I'm trying to get in contact with Mr Butch Searcy. I have the opportunity to buy one of his rifles chambered in 577 nitro Express however the seller does not have any of the paperwork with the information about what ammunition or bullet weight was used to regulate it. I know he is not making firearms anymore but I wanted to reach out after seeing one of your post about him.
Daryl S wrote on mgstucson's profile.
Hi - the only (best) method of sending you the .375/06IMP data is with photographing my book notes. My camera died so the only way I can do it is with my phone. To do that, I would need your e-mail address, as this
new Android phone is too complicated to upload to my desk computer, which would be easier and to down-grade, reduce the file sizes.
Best wishes
Daryl
 
Top