458 Lott with Peregrine Solids Load data?

Nhoro

AH elite
Joined
Sep 16, 2014
Messages
1,225
Reaction score
2,461
Location
Harare,Zimbabwe
Media
29
Member of
Cleveland Gun Club
Hunted
Zimbabwe
Hi All, anyone have load data for 458 Lott wit Peregrine 500 gr VRG-2 solids and VRG3 softs with Vihtavuori N550 powder or maybe willing to run a Quickload for me ?

Also anyone used Gordons Reloading Tool ? Freeware copy of Quickload it seems. If I can get a Quickload file, I will compare it to the Gordons results or maybe just publish it here. Freware and things that go bang-I think I am right to be a little cautious- hehe.
 
Hi Nhoro, I load the 500grain vrg3 in my CZ 458 Lott using 75grains of Vithavouri N530. This is the grouping I am getting with open sights and my not so great eyes at 25 meters. Hope this helps
 

Attachments

My 458 Lott with Peregrine VRG3 , i use the 450g bullet in both VRG2 and VRG3 (they have the same point of impact)
Target was at 50m

3B995CEE-7C7E-4757-8C57-E2FA2E8EE4EE.jpeg
 
i need to correct this last post of mine , this was fired with my 416 Rigby and a 340g Peregrine , i will post the photo of my Lott which was very similar.

my 458 load is :

1617778023816.png
 
Thanks for the data, if only we could still get S.....anything anymore. Have to resort to imported propellants for the moment
 
Nhoro, just a quick check but on QL with 80gr of N550 and Cartridge length of 92.5mm 102.4% case filled if case takes 110gr of H2O will give you a speed of 2150fps and no pressure at all.

But normally QL is not as acurrate as predicted.

I had to squeeze in more powder than QL prediction to get the speed I wanted out of my lott.

N550 will not be my first choice in powder something a bit faster like Norma 203B or N540
 

Forum statistics

Threads
66,414
Messages
1,469,176
Members
140,739
Latest member
EileenMaur
 

 

 

Latest profile posts

A Frame66 wrote on Marcus bock's profile.
Hi Marcus
I'll 2nd limcroma! Booked 2nd trip at SCI last week. Those guys are great. Trying to get hooked up with Peter when he gets to the states if I can break away.
roklok wrote on SkullKeeper's profile.
What sling studs do those swivels fit ? They look to be quite a bit wider than the standard modern swivels. They may be just what I need for my Remington 30 Express wide swivel studs. Can you measure the pin diameter ?
Safari Dave wrote on Boardwalk72's profile.
Do you know where your .240 Weatherby was manufactured?
Culling old sable cow with bow!

 
Top