405 win & 45-90 Reloading data

Hoff

New member
Joined
May 1, 2023
Messages
2
Reaction score
2
anyone willing to share any reloading data for 405 win & 45-90 express.
will be using out of modern (Miroku) rifles. 1895 & 1885 in 405 Win / 1885 in the 45-90
I mainly have 300 , 350 & 400 gr bullets for each.
I appreciate any information shared. ( will use at my own risk )
Thanks

Hoff
Colmesneil , TX
 

Attachments

  • Screenshot 2023-07-12 at 7.56.23 AM.png
    Screenshot 2023-07-12 at 7.56.23 AM.png
    875.5 KB · Views: 295
  • Screenshot 2023-07-12 at 7.56.24 AM.png
    Screenshot 2023-07-12 at 7.56.24 AM.png
    915.1 KB · Views: 228
  • Screenshot 2023-07-12 at 7.56.26 AM.png
    Screenshot 2023-07-12 at 7.56.26 AM.png
    967.9 KB · Views: 235
  • Screenshot 2023-07-12 at 7.56.27 AM.png
    Screenshot 2023-07-12 at 7.56.27 AM.png
    923.4 KB · Views: 241
I've been playing with light loads and .410 bullets for a .41 Magnum due to few and far between 300 grain Hornady bullets. Tried the .412 cast bullets from midway and the first on gave me a perfect side on hole at 50 yards so abandoned that route.

I have one of the new reissue Winchester 1895's as well.

The Hornady reloading manual also has data for the .405 Winchester.
 
Have loaded a lot of black in the 45-2.4, and duplex, but never straight smokeless....COTW has some data, but it is not always to be duplicated. Best of luck...............FWB
 
I have some old 45/90 loads from when I had a sharps, and my 405 loads are for my 405 double rifle so I will PM them to you.
 
In my #1 300 gn Northfork, Hornady and Barnes X all worked well with Benchmark, TAC, Varget and 8208. Hodgdon has data. 400 gn Woodleigh (.411) were excellent with 8208 or Reloder 15. 400 gn Hornady (.410) scattered all over and hit the target sideways if at all.

For a very light load I used 265 gn Tru Cast (.411) over 12 gn of Unique and 1 gn of poly pillow stuffing. This combination gave 1240 fps and made colverleaf groups at 25 yds, only 2 inches below full-powered 300 gn loads.
 

Forum statistics

Threads
64,549
Messages
1,421,411
Members
130,945
Latest member
SherlynEus
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top