.375 H&H & IMR4831

[aj113]

Good evening all. I have a reasonably accurate load worked up for my .375 with 300 grain Accubonds and IMR4831. I tried several powders that are more temperature stable according to the burn charts, but the rifle just doesn't seem to like them as well (H4350, IMR4350, IMR4064). Accuracy and chronograph numbers are much better with IMR4831. Does anyone have any real world feedback on whether the IMR4831 causes any issues in hot temps? It was sub 30 degrees today when I was shooting, and it won't be hot enough here for me to test the temperature sensitivity for another 5 months.

 

[Qc_BearHunter]

I use IMR4831 in my 270 win. with 150 grains bullets and my 338 WM with 250 grains bullets. Never had a problem shooting them during the summer months versus fall.

 

[Choupique]

No first hand experience with this exact combo. I know I couldnt fit enough in a .338 win mag case to cause any pressure signs on 100+ degree days. I imagine that would apply moreso for the .375 h&h. 4831 is pretty slow and the .375 is definitely not overbore.

 

[aj113]

Thank you for the information. The problem fixed itself. I can’t find more IMR4831 anywhere, am running a little low on it, and I used it in my .243 Win load. So I’m saving the rest for the .243 and pivoted a different direction for the .375. But that’s good to know for the future.

The 4831 probably isn’t ideal from a bulk standpoint in the .375 either. I had some issues with being able to seat the bullets deep enough. But when I was able to it shot pretty well.

 

[Maskell Shotgun academy]

Varget is the best of both worlds, this is my load for my rifle, not sure it will work for yours so start 5 grains lower and work up, Varget is a great powder that works will all the projectiles of all weights for the 375 h&h
But of course that’s just my opinion

 

[aj113]

Can’t argue with those results.

 

[Qc_BearHunter]

My BRNO ZKK 602 375 H&H shoots this same load like a turkey gun. She likes the Barnes 270 TSX to be shot at around 2600fps.