300 gr Silvertip 375 H&H load data

1peggy

AH veteran
Joined
Jan 21, 2011
Messages
139
Reaction score
197
Location
Wytheville, VA
Media
5
Hunting reports
Africa
2
Hunted
Spain, Germany, Zimbabwe, Zambia
What bullet load data would you use for 300 gr. Silvertips in a 375 H&H. I am thinking any 300 gr bullet. Thanks
 
Vintage silver tips with aluminum tip or modern like the balistic silver tips?

If the latter I would use Nosler Balistic tip/accubond data.
 
Vintage silver tips with aluminum tip or modern like the balistic silver tips?

If the latter I would use Nosler Balistic tip/accubond data.
Old ones with aluminum. I have about 130 in boxes.
 
Hi 1peggy,

The classic 300 grs 375H&Hmg load: from 78 to 80 grs of any of the 4350.
I use 80 grs with Hornady and Nosler P 300 grs. Winchester cases, magnum primers.
Get 2500/2550 f/s in my Winchester 70 pre 64 with its original 25" barrel.

Good luck!
 
Hi 1peggy,

The classic 300 grs 375H&Hmg load: from 78 to 80 grs of any of the 4350.
I use 80 grs with Hornady and Nosler P 300 grs. Winchester cases, magnum primers.
Get 2500/2550 f/s in my Winchester 70 pre 64 with its original 25" barrel.

Good luck!
Thanks
 
I shoot less than 1 MOA with 300 grain Barnes TSX using 75.5 grains of W760 and CCI 250 primers.
Very accurate load.
 

Forum statistics

Threads
63,619
Messages
1,399,981
Members
125,667
Latest member
MakaylaPar
 

 

 

Latest profile posts

Screenshot 2025-10-09 at 7.53.47 AM.png
A two minute video I made of our recent Safari. I think it turned out well
Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
 
Top