Ruger No. 1 Parts, sites, Jard trigger

I'm clearing out some things. I realize there may not be any takers for a big batch of Ruger No. 1 parts here, but I figured I would post this before I sell them to Numrich arms. In addition to all the parts, I am selling two NEG peep sites, a Hicks accurizer, and a Jard trigger. Again, all of these are for the Ruger No. 1 rifles although some of the parts for the sites in particular will fit M77 Mark II Rugers. Also all the small parts, including the barrel ribs are sold as a batch only. The NEG sites, Hicks gizmo and Jard trigger are separate. They are priced as follows:

-NEG site with small aperture, $60 shipped.
-NEG site with two apertures and adjustment tool, $80 shipped.
-Jard trigger, 2 1/2 pound spring provided by manufacturer, $80 shipped.
-Hicks Accurizer, $30 shipped.

Here's a list of the parts. That is $125 for the bunch shipped.

Pistol grip Medallions for the grip cap
Pistol grip cap for number one, steel
Trigger adjustment spring, Blue - four
Safety bar two paragraph safety arm
Magazine latch, cross pen, part number MS06600
Hammer, transfer block, pivot pin - three
Ejector strut spring
Safety detent spring - two
Safety bar pivot pen
Sear spring - two
Ejector plunger spring
Forend takedown screw for all number one models - three
Trigger/sear spring Blue, Ruger part number J02400
Barrel rib dowel – two
Firing pin rebound spring.
High 450 barrel rib screw - three
Ejector plunger spring
Safety arm, pivot pin - three
Foreign eustachian all number one models - two
Barrel band sling swivel for light porter contour Ruger number one
Pawl Spring retraining screw
Front site retainer plunger for Ruger 77 Mark II and number one - two
Ruger front site plunger spring - three
Lever latch spring - two
Lever latch, pivot pin
Stock bolt washer for all Ruger number one models.
Rear site clamp screw for Ruger M 77 Mark two and number one.
Front site base set screw for Ruger Mark II and number one - four
Ruger front site blade assembly for M 77 Mark two and number one - two
Hammer strut assembly for all number one models
Barrel ribs, I believe these are for the 1B profile - two
Breach block arm, a.k.a. hammer transfer block

I'll take the NECG sites, both of them. PM inbound...

Great, their yours Woodcarver.

Only things remaining are the Jard trigger, the Higgs accurizer, and the bag of Arius Ruger, number one parts.

I will take the barrel ribs.

Dave! PM sent.

The parts, including the ribs, are sold to AZDave. Thanks!

The Jard trigger and Hicks gizmo are still available.

The Jard trigger is sold pending payment. The only thing left is the Hicks gizmo.