FINALLY!!!

Good luck!
I have flown IAH Doha JNB
It's a long flight but Houston is a breeze on return compared to Atlanta or Newark if you have guns. Houston barley checked my 4457s this last trip. Breezed right thru on return.
Enjoy your trip
 
Ohare didn’t check anything on the way back, just checked gun to the next airline. They didn’t check the 4457 in Harare on the way out as well.
 
Gracy is very good to work with-one suggestion on clothing is to take alittle more than you think you need and leave some there after your safari. Somebody will be glad to have your left overs.
 
Gracy is very good to work with-one suggestion on clothing is to take alittle more than you think you need and leave some there after your safari. Somebody will be glad to have your left overs.
For the locals or for other hunters?

From what I've seen, it would take about 3 native dudes to fill out my 2XL. :E Shrug:
 
For the locals or for other hunters?

From what I've seen, it would take about 3 native dudes to fill out my 2XL. :E Shrug:
They'll fit the women.
a-outta.gif
 
You and I same size-there was a skinner where I hunted that never got “hand me down “ clothes from hunters. He was happy to get mine-
I could leave some shirts, but my pants are 38x38. ;)
 
Congrats! can't wait to read the report!
 
-you and I, same size. But I didn’t leave kuiu pants behind. It was just a suggestion, not a requirement. Hats, gloves, sweatshirts etc, all easy to leave for someone else. Where I hunted the trackers had been supplied good boots and coats and had better knives than I did. Your ph might have suggestions for “tips” in addition to money. I don’t think anyone wants Dallas cowboy t shirts anymore tho :ROFLMAO:
 
-you and I, same size. But I didn’t leave kuiu pants behind. It was just a suggestion, not a requirement. Hats, gloves, sweatshirts etc, all easy to leave for someone else. Where I hunted the trackers had been supplied good boots and coats and had better knives than I did. Your ph might have suggestions for “tips” in addition to money. I don’t think anyone wants Dallas cowboy t shirts anymore tho :ROFLMAO:
That's good. I've had a visceral hate for the Cowboys since the 70s.
 
I take sewing kits and buttons and ribbon for the women and hard candy for every one. the men small flash lights especially the one that have strobe lights and a lot of battery's socks and a couple fleece long sleeve pull overs
 
-you and I, same size. But I didn’t leave kuiu pants behind. It was just a suggestion, not a requirement. Hats, gloves, sweatshirts etc, all easy to leave for someone else. Where I hunted the trackers had been supplied good boots and coats and had better knives than I did. Your ph might have suggestions for “tips” in addition to money. I don’t think anyone wants Dallas cowboy t shirts anymore tho :ROFLMAO:
@Firebird
My son follows the Dull Arse Cowboys in the NFL. There's no accounting fir taste. The Packers is a better team.
Bob
 
Finally got the replacement stock from Boyd's. Still doesn't fit. :mad:

So I took it to Gordy & Son's near downtown Houston. The gunsmith talked me into bedding it instead of cross-bolt/recoil lug in the tiny piece of wood in front of the trigger, where the OEM stock actually cracked. He told me he could fix the original, and I was like...it's a dried up piece of Turkish walnut, and it's too short anyway. The juice ain't worth the squeeze. Also said the flitz I put in the rails was enough polishing, that all I needed was to get the high spot on the extractor taken off. All right, sold. Should have it back by Christmas or so.
 
Finding myself approaching the point of being in a pickle

  1. My 9.3x62 has been in the shop since October for stock work and a bit of metal work on the extractor; I'm expecting it back soon, but who knows.
  2. My 404J has a nice load with Hornady bonded DGX, but they're as hard to find as A Frames
  3. My 280 AI has 2 nice loads, 160 A Frame (see point the 2nd) and 175 gr Partition (also see point the 2nd)
  4. my 45-70 is ready to rock. I have about 30 or so 425 gr loads in the cartridge box, another 50 of those bullets in the box waiting to be loaded; and about 40 525 gr in the cartridge box.
As much as I like my 45-70 and can shoot it well, and i think it would be more than adequate for shooting conditions in Limpopo, that isn't the gun I want to bring.
 
Finding myself approaching the point of being in a pickle

  1. My 9.3x62 has been in the shop since October for stock work and a bit of metal work on the extractor; I'm expecting it back soon, but who knows.
  2. My 404J has a nice load with Hornady bonded DGX, but they're as hard to find as A Frames
  3. My 280 AI has 2 nice loads, 160 A Frame (see point the 2nd) and 175 gr Partition (also see point the 2nd)
  4. my 45-70 is ready to rock. I have about 30 or so 425 gr loads in the cartridge box, another 50 of those bullets in the box waiting to be loaded; and about 40 525 gr in the cartridge box.
As much as I like my 45-70 and can shoot it well, and i think it would be more than adequate for shooting conditions in Limpopo, that isn't the gun I want to bring.

Keep working all of the first 3 points.. one of them will work out... The 4457 and rifle permit application can still wait a few months if youre not hunting until August.. I'd guess one of those items will come together with time to spare..

Or..

you could just go buy yourself a new rifle in a new caliber (maybe something pretty in 300 H&H or 375 H&H?)... and start fresh!

:A Stirring::A Stirring::A Stirring:

:D
 

Forum statistics

Threads
54,728
Messages
1,161,280
Members
94,733
Latest member
davelotman21
 

 

 

Latest profile posts

Our trophy shed is filling up and we are only getting started,

cwpayton wrote on CM McKenzie's profile.
Sir ,is that picture of you packing the shoshone river trail thru buffalo pass? Im trying to get a plan togather for a ride. do you pack professionally or for pleasure. thanks
Cal {cwpayton}
ghay wrote on gearguywb's profile.
Is this rifle sold? If not what is the weight of it and do you know if there is enough difference in diameter between the 35W and the 9.3 to allow for a rebore to a 9.3x62 which is what I am after?
Thanks,
Gary (Just down the road in Springfield)
Woods wrote on Hunter-Habib's profile.
Forgive me if this is the incorrect area, I signed up to this forum just now because I wanted to be on the list to purchase a copy of your autobiography. Please feel free to pass my information along to whomever is selling. Thank you so much. I look forward to it!
I like the Tillie in my picture. They are supposed to fit loose (2 fingers inside hat band), have mesh for cooling, and hold their shape after washing.
 
Top