Wanted Left Hand Ruger 375

hseII

AH senior member
Joined
Apr 2, 2022
Messages
77
Reaction score
93
I’ve had a hankering for one of these for years. I kept holding out for an Alaskan with a 23” barrel but never ran across such.

what is available?

Thanks
 
Last edited:
Hi hsell, fellow lefty here. I think if you follow gunbroker and guns international online they do pop up time to time. I was looking for a LH 375 h&h and followed those online auctions and would see the rugers more frequently than what I was looking for. Between those and posting your request on a few forums like this, I’m sure something will turn up! Good luck.
 



Not much available currently but I’m sure if you keep an eye out something will pop up over the next couple months.
 

Attachments

  • Screen Shot 2023-01-09 at 10.00.12 AM.png
    Screen Shot 2023-01-09 at 10.00.12 AM.png
    2.6 MB · Views: 131
  • Screen Shot 2023-01-09 at 10.00.13 AM.png
    Screen Shot 2023-01-09 at 10.00.13 AM.png
    1.6 MB · Views: 113
  • Screen Shot 2023-01-09 at 10.00.15 AM.png
    Screen Shot 2023-01-09 at 10.00.15 AM.png
    622.3 KB · Views: 115
  • Screen Shot 2023-01-09 at 10.00.25 AM.png
    Screen Shot 2023-01-09 at 10.00.25 AM.png
    1.3 MB · Views: 124
  • Screen Shot 2023-01-09 at 10.00.26 AM.png
    Screen Shot 2023-01-09 at 10.00.26 AM.png
    1.7 MB · Views: 99
  • Screen Shot 2023-01-09 at 10.00.58 AM.png
    Screen Shot 2023-01-09 at 10.00.58 AM.png
    1.4 MB · Views: 91
  • Screen Shot 2023-01-09 at 10.00.59 AM.png
    Screen Shot 2023-01-09 at 10.00.59 AM.png
    1.9 MB · Views: 97
  • Screen Shot 2023-01-09 at 10.01.01 AM.png
    Screen Shot 2023-01-09 at 10.01.01 AM.png
    907.7 KB · Views: 114
Very nice rifles for the money. When you find one, do yourself a favor and replace the recoil pad. The 1/2" hockey puck that Ruger seems to insist on putting on their rifles doesn't do much. Mine weren't too bad stock, but 1" decelerator pads were a huge improvement.

Ruger does still list a couple lefty .375's, but it seems they make them in batches, so keep your eyes open and sooner or later a bunch will come up for sale.
 
The 375 FTW? Does anyone know if they were offered in LH?

On the Ruger Website it shows the FTW in 375 & 6.5 Creedmoor, but doesn’t really go in to detail about what the FTW is?
 

Attachments

  • Screen Shot 2023-01-09 at 10.01.42 AM.png
    Screen Shot 2023-01-09 at 10.01.42 AM.png
    2 MB · Views: 95
  • Screen Shot 2023-01-09 at 10.01.45 AM.png
    Screen Shot 2023-01-09 at 10.01.45 AM.png
    933.9 KB · Views: 100
Two on GB now that I see. Not very attractive rifles in my mind, and no open sights. Whether that's a problem depends on your plans for the rifle though.

https://www.gunbroker.com/Bolt-Action-Rifles/search?Keywords=left hand&PageSize=96&Sort=13&View=1&Ch-Caliber=.375 Ruger
I have been watching them- I would rather they have open sights but I suppose they could be added easily enough.

Those are the first 2 LH 375 Rugers I’ve seen in a while- I’ve been quietly looking.
 
I got mine in GunBroker too, from a guy who put maybe 100 shots through it before he sold it. Probably less, but that's another story. It just requires some patience. Things definitely cycle on the auction sites. And I too got a better stock with a better pad, worth the extra cost. The tougher part right now, if you hand load, is reloading brass. I'm glad I bought enough to last me because I haven't seen any in a while.
 
I have been watching them- I would rather they have open sights but I suppose they could be added easily enough.

Those are the first 2 LH 375 Rugers I’ve seen in a while- I’ve been quietly looking.
I have a FTW model if you’re interested. But like you said no open sights.
 
I got mine in GunBroker too, from a guy who put maybe 100 shots through it before he sold it. Probably less, but that's another story. It just requires some patience. Things definitely cycle on the auction sites. And I too got a better stock with a better pad, worth the extra cost. The tougher part right now, if you hand load, is reloading brass. I'm glad I bought enough to last me because I haven't seen any in a while.
What stock did you go with?

a local fellow had a few boxes of loaded Hornadys- I messaged him this morning to see if he still had them. I’ll be patient & set up notifications.
 
I’ve had a hankering for one of these for years. I kept holding out for an Alaskan with a 23” barrel but never ran across such.

what is available?

Thanks
They will pop up. I just bought my son one for our 2024 PG hunt in LH in 300WM. I will say the Ruger is both nice looking and I was surprised at the excellent trigger was not prepared for that in a good way
 
What stock did you go with?

a local fellow had a few boxes of loaded Hornadys- I messaged him this morning to see if he still had them. I’ll be patient & set up notifications.
At the time Accurate Innovations had a laminate stock in left handed Ruger M77 long action. The barrel is larger diameter than a standard barrel so I had to sand out the barrel channel a bit to get it to free float, but otherwise it worked perfect. I really like walnut and I've thought about getting a walnut stock by Boyds and doing the same.
 
Update-
A LH 375 has been sourced.

What magnifications are y’all using on these rifles?

I’m debating on a 1-6, 1-8, or a 2-10 Trijicon but the 1-8 I was leaning towards has a 34mm tube.

Otherwise probably a 2-10x36 Trijicon.
 
Last edited:
I currently have a Tract 1-8x24 on a 20", and a Schmidt & Bender 1.6-8x42 on a 23.5" one. I have previously had Kahles 1.1x4x24 &1.5-6x42 on them. These are / were 30mm tube scopes.

A lot of flexibility with the cartridge as with the 375 H&H. I would tailor the scope to my intended use. I would not have an issue putting a 1.7-10x42 if I felt I needed more magnification. I think the 1-6x24 is about and ideal compromise for my use.
 
Last edited:
I have a left handed FTW in 375 that I put into a Boyd’s platinum in “shady camo” laminate. It matches the color of the action and barrel well. I put a trijicon 3-9x40 on top. The only thing missing on this rifle is the sights and I wish the magazine box was a little longer.
 
I’ve had a hankering for one of these for years. I kept holding out for an Alaskan with a 23” barrel but never ran across such.

what is available?

Thanks
Good luck with the search. I looked for about 10 years before I found a LH Montana Rifle Company in 404J, I should have my hands on it next week, might even take it to the deer woods for closing weekend in Louisiana.

Good news for you is 375 Ruger LH is a lot more common.
 
Update-
A LH 375 has been sourced.

What magnifications are y’all using on these rifles?

I’m debating on a 1-6, 1-8, or a 2-10 Trijicon but the 1-8 I was leaning towards has a 34mm tube.

Otherwise probably a 2-10x36 Trijicon.
I'd go with that 2-10X Trijicon. That covers everything I've needed for a plains game rifle and honestly 2X would have worked fine for my buffalo.
 
I have a left handed FTW in 375 that I put into a Boyd’s platinum in “shady camo” laminate. It matches the color of the action and barrel well. I put a trijicon 3-9x40 on top. The only thing missing on this rifle is the sights and I wish the magazine box was a little longer.
Please share a photo when you get time.

I wonder if the Wyatts magazines could be fitted to these like they can the R700?
 

Forum statistics

Threads
64,277
Messages
1,415,583
Members
129,581
Latest member
HerbertNnm
 

 

 

Latest profile posts

wheelerdan wrote on Jager Waffen74's profile.
Sir, I think I have been writing to you about the purchase of the HK 639 rifle under an email "Tt Jake." If this is you, then I am truly interested. I am just trying to verify identify. Tt Jake is asking for a cash transaction. No disrespect intended, Just trying to verify who I am talking to. Thank you. Respectfully. Dan
Gary C wrote on HuntingFreak's profile.
Hey my friend, I am returning to SA for a Cape Buffalo hunt in June 26. My outfitter has suggested Highveld but I have read some poor reports. Wondering how satisfied you were with your mounts from them? Thanks in advance.
Finally back to somewhat normal I missed reading the messages and posts
Remember I will be at the ISE show in Denver Colorado for 8-12 January, and after the show I will be available for meetings anywhere in the USA I will traveling around to meet with old and new clients, let me know and we will set up a meeting!
Beautiful Aardwolf for our Spanish client and good friend Alberto
WhatsApp Image 2025-11-12 at 17.27.22 (2).jpeg
 
Top