Wanted Barnes 9.3 TSX 286gr (BA390473)

Clan_Colla

AH member
Joined
Oct 31, 2016
Messages
18
Reaction score
29
Media
4
Need :
Barnes, 9.3 TSX 286gr (BA390473)

please email
[redacted]
 
Last edited by a moderator:
Thank you for the offers of ammunition ,other bullets and brass.

Need these specific projectiles only for a load.
 
If you need 9.3 brass i have loads of once fired norma
 
Just out of interest sake. At what velocity do you shoot them to open up properly? I tried them at 2250 fps, which is where they regulated with my old Type A Mauser’s sights, but the results from a wet pack, as can be seen in the picture were not adequate for hunting. Now I’m back on Woodleigh RNs with great results.

IMG_2630.JPG
 
Have you used this load before? As mentioned above, I would be worried about expansion. It would be worth stepping down in weight if you want to run a TSX
 
Load is for a friend,who has used TTSX and TSX in a number of calibers.
Yes , we (he and I) have had “penciling” with Barnes and other “monolithic “ “expanding “ types. Nonetheless, this is the projectile desired for this load.
 
I run TSX in my 375 and they expand nicely and retain their weight very well! I'm wondering if 2250FPS might be a little too slow to get full expansion??


20230822_140904.jpg
 
Last edited by a moderator:
I run TSX in my 375 and they expand nicely and retain their weight very well! I'm wondering if 2250FPS might be a little too slow to get full expansion??

It is 100% to slow. I shoot 45gr in a .222 at just short 3100 fps and 180gr in an 8x60S at 2750 fps with devastating effects.

As mentioned, that is unfortunately where the open sights regulate, and I am curious at what velocity a .286 gr TSX opens in a 9,3x62. I’ve had exactly the same experience with 286 gr Rhinos at 2300 fps and 300 gr Rhinos at 2250 fps. The advantage of the 300 gr rhino round noses is they now make a wonderful solid to put the rear of a departing giraffe if a client missed the vitals.
 

Forum statistics

Threads
63,361
Messages
1,393,724
Members
123,787
Latest member
RoseannFen
 

 

 

Latest posts

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on 0777446998
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top