Speed too slow, help!

Jack used 62 grains of H-4831 in a Winchester case with the 130gr. Nobler partition. He said 60 gr. Was the max. with the Remington case.
 
58 to 60 gns of surplus 4831 was considered to be a good zone with 130 gn bullets.
i used a lot of it at 59 gns, giving around 3050 in a brno 600 24"barrel, and just over 3000 in a 22" rem 700.
it was in fact the go to powder for 130 & 150 gn 270 bullets.
modern h4832 (ar2213sc) is equivalent.
bruce.
 
I took the chronographer out the other day and here are the results:
.270 Win
Win Large Rifle Primer
58gr H4831
140gr TSX TB
COAL 3.245
22" barrel on a Model 700
2900 fps
No pressure signs and sub 1 MOA! Fast enough too (IMO). Faster than I thought I would get with that barrel and still 2gr below the max recommended by Barnes. Mission accomplished.
 

Forum statistics

Threads
65,554
Messages
1,447,120
Members
136,830
Latest member
TobyKsq805
 

 

 

Latest posts

Latest profile posts

Woodcarver wrote on RAVEN ROCKS PRECISION's profile.
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
No Promises wrote on swoobie's profile.
X5i scope is perfect - thanks for an easy transaction! Buy with confidence.
Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
Ray B wrote on JMJ888's profile.
I am righthanded, so not interested in the rifle, but I have a 375 RUM and 350 gr bullet loading data is very hard to come by. If you could reply with information regarding your loads I would greatly appreciate it. Thank you, Ray Boone, Leavenworth, WA
mcr wrote on gbflyer's profile.
Hello - I was looking at your post from several years ago regarding the Winchester 300 H&H. Any chance you still have the lefty M70 300 H&H for sale?
Thank you, Mike
 
Top