Scope Mounts - Quick Detach System (M98 and/or Rigby .375H&H), Wanted - TY!

[Raskolnikov743]

AH Community,

Looking to see if any of you have any detachable scope mounts for M98, before I bite the bullet via retailers/distributors out there.

Thanks!


JW

 

[degoins]

If you end up having to go the retail route, the Talley rear base will not let you operate the bolt unless you grind/mill the right rear corner off.

 

[Raskolnikov743]

This is sound wisdom - thank you!

 

[Ontario Hunter]

I use quick detach Warne rings with a standard base/rail for my Czech 98 Mauser. The base is not detachable but low enough for iron sights to be unobstructed when scope is removed. I found a now discontinued Weaver one-piece base that mounts Warne low rings very low. Consequently, acquisition of either 30mm 1-4x scope or iron sights is instantaneous. Initially I mounted the scope on a semi-rail from SARRCO but this Weaver base is slightly lower. My standard action 404J and scope holds zero on remounting and in spite of sharp recoil.