Sabatti Question - Help needed!

[Meann-Machine]

Both triggers were inadvertently pulled when the rifle - 92 450-400 - was apart. I need to know how, or if, I can reset the triggers somehow in order to be able to put the rifle back together. Any help would be greatly appreciated! Thanks.

 

[AkMike]

Rule #1

Don't do this again!



With a WOOD bench or table you can press against the lugs at the front of the action swinging them downward. Use wood only so no damage happens to these cocking pieces.

I've had to reset these before and used a 2X4 held in a vice.

 

[Meann-Machine]

Rule #1

Don't do this again!



With a WOOD bench or table you can press against the lugs at the front of the action swinging them downward. Use wood only so no damage happens to these cocking pieces.

I've had to reset these before and used a 2X4 held in a vice.

Thanks Mike,
I might be a little dense. I have attached a picture of the front of the receiver. could you please be a little more specific on exactly what you are advising me to do and how to do it? If it would be easier I would be glad to provide you with my private email address. And don't worry, I can guarantee the rifle will never be in a position or place where this can happen again.

Craig

 

[AkMike]

I'll reply thru your email

 

[Meann-Machine]

Thanks Much !

Issue resolved! Thanks Mike!

 

[AkMike]

No Problem! Now you know how to help the next guy when, not if it happens.