Nitro Case Life

redriverjake

AH veteran
Joined
Sep 25, 2011
Messages
160
Reaction score
268
Media
7
Hunted
Zambia, Tanzania, USA, Mexico, Europe, Middle East, Australia,
With modern brass, what is the case life with the big Nitro Express cartridges at standard load pressures ? How many reloadings can be reasonably expected?

Screenshot_20231009_194133_Instagram.jpg
 
Last edited by a moderator:
The make of the case is a big factor here. Norma brass is very good but have thinner sidewalls than Hornady. A friend gets 3-4 shots out of his Norma .470 brass, but 5-6 shots out of his Hornady .470 brass. I'm shooting a .450 NE and I'm using Bertram brass because it's all I could get hold of. The quality of the brass that I have is very good, though, and I've reloaded one batch of twenty cases for the third time now with no problems.
 
Last edited:
The make of the case is a big factor here. Norma brass is very good but have thinner sidewalls than Hornady. A friend gets 3-4 shots out of his Norma .470 brass, but 5-6 shots out of his Hornady .470 brass. I'm shooting a .450 NE and I'm using Bertram brass because it's all I could get hold of. The quality of the brass that I have is very good, though, and I've reloaded one batch of twenty cases for the third time now with nor problems.
Firstly, thank you for your reply. The I have two makes of brass, the first being BELL and the other Jamison. The Jamison fodder seems quite more substantial in terms of both sidewall and rim thickness.
 
BELL hasn't been made for some years, and I do recall problems with them, specifically cracks in the neck area. I will have to dig out some old notebooks, but if I remember correctly, annealing before first use basically cured the problem.
 
I don't see any reason why big bore brass should fail at all if the case mouth and neck are annealed after every three or so firings. Primer pockets should remain tight "forever" at the low pressures such cartridges develop. Necks should not spit if the brass is not over worked and if it is annealed every few firings. Don't over size brass and it will serve a long, long time. 20 shots or more.
 
Used Bell brass in my 458 Lott. Annealed after every two loadings and got 5-6 loading before I retired them when Hornady brass became available. The same comment on Barnes 458 brass as to life. For me annealing was the primary factor in case life.
 
Great information and I will be sure to anneal the case mouth/neck after every few firings. Thank you all, gentlemen. Aside from the annealing, are there any other tricks that will extend the life of these very hard to find and expensive cases ?
 

Forum statistics

Threads
61,917
Messages
1,358,193
Members
117,447
Latest member
Marto
 

 

 

Latest profile posts

crossfire3006 wrote on JoninCO's profile.
Had an excellent classifieds transaction with JoninCO. A truly honest and standup member. I wouldn't hesitate at all to deal with him again. Thanks, J!
Francois R wrote on Lance Hopper's profile.
Hi Lance, Hope you well. I collect Mauser rifles and they are very much part of my cultural history in Africa. Would you consider selling the rifle now a year on ? I'd like to place it in my collection of Mauser rifles. Many thx
Cooper65 wrote on Rockwall205's profile.
I saw where you hunted elephant with backcountry safaris in Zimbabwe.
Was looking to book an elephant hunt and wanted to know how your hunt went
and if you would recommend them.

Thanks
Mike
hi, do you know about lions hunters, leopard hunters, and crocodiles hunters of years 1930s-1950s
I'm new to Africa Hunting. I would like to purchase a Heym 450-400 double rifle. I'm left-handed but would prefer a non-canted gun. Is anyone in the community considering parting with theirs?
 
Top