I need some of your wisdom on a 6.5 Swede sporter!

I had a local, well-trained gunsmith use a 6.5x55 match reamer from JGS on a 30" Krieger medium Palma blank for my Nesika K prone rifle back in 2002. That rifle shot really well in the 'any rifle' Palma-format matches I used it in, usually shooting Sierra 142MKs at 2900fps with N165 in Lapua brass. Years later, after I'd started doing my own barrel work, I was looking at the Ackley Improved version of the Swede, and wound up buying a AI reamer for use on a switch bbl BAT 3LL action prone rifle build, doing 30" hvy Palma barrels in both 6.5x55AI & straight 284 Win. I never did shoot the 6.5x55AI bbl in any of the 1000yd prone any/any matches I shot out at CRC near Byers, Co, instead preferring to go with 180VLDs out of the 284 bbl. But in both that rifle and another switch-bbl Bighorn tactical rifle, the 6.5x55AI bbls have shot quite accurately with loads that run not that much faster than the original Swede - and I don't have to trim brass after every firing like was necessary with the original Swede with all its case taper.
 
Schultz & Larsen - Victory, most presise rifle of all and also best trigger.
 
Here is the pair of Husqvarna 1640's I purchased from Simpsons Limited. Top is a 6.5x55 and bottom is a 9.3x62. Super happy with the rifles and Simpsons!
20250929_154031.jpg
 
I have several 6.5x55's, all m96 in Husqvarnas and Carl Gustavs, nothing fancy but good, accurate working guns. The lack of gas shield can be partly alleviated by simply attaching a flat washer to the shroud ( pic below )
The rifle I use the most is a '96 Husky in 6.5x55 Improved, 21" barrel ( in the pic you will see that I was too lazy to cut the extra inch off the barrel when fitting the new stock ), turned down bolt handle and fitted an old Tasco 6x scope, I picked up the stock from a gun show for $80, the recoil pad is only to add LOP because I am 6'4" and have Orangutan arms !! Shooting 129gr Hornady interlocks at around 27-2800 FPS, I have never had to shoot an animal twice. As I said, nothing fancy, a working gun that I did the alterations to myself.
6.5.png
Shroud.jpg
6.5x55 M96.JPG
6.5-284  6.5-9.3x55Imp..JPG
 

Forum statistics

Threads
64,172
Messages
1,413,450
Members
129,014
Latest member
JerriChewn
 

 

 

Latest profile posts

Beautiful Aardwolf for our Spanish client and good friend Alberto
WhatsApp Image 2025-11-12 at 17.27.22 (2).jpeg
C-YA-L8R wrote on PaulB's profile.
Hi PaulB,
I have a Ballard Arms Model 1885 chambered for .333 Jeffery Flanged. Do you have any idea where I can get ammo for this?

I am new to this forum so I am sorry if I am doing something wrong!
Thank You!
Bruce D
Lakewood Village, California

BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (1).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (2).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (11).jpg
BALLARD ARMS MODEL 1885 .333 Jeffrey Single Shot Falling Block SN 1178 - (5).jpg
STARCHEDUPDAD wrote on Acopperdawg's profile.
what's up buddy how are you doing today
Updated available dates for 2026!

1-27 feb is open
13-31March is open
1-10 April is open
17-30 April is open
1-6 May is open
24-31 May is open
12-18 June is open
24-30 June is open
1-17 July is open
August is now fully booked
7-30 September is open
October is wide open

Get your hunt booked today!
 
Top