I need some of your wisdom on a 6.5 Swede sporter!

I had a local, well-trained gunsmith use a 6.5x55 match reamer from JGS on a 30" Krieger medium Palma blank for my Nesika K prone rifle back in 2002. That rifle shot really well in the 'any rifle' Palma-format matches I used it in, usually shooting Sierra 142MKs at 2900fps with N165 in Lapua brass. Years later, after I'd started doing my own barrel work, I was looking at the Ackley Improved version of the Swede, and wound up buying a AI reamer for use on a switch bbl BAT 3LL action prone rifle build, doing 30" hvy Palma barrels in both 6.5x55AI & straight 284 Win. I never did shoot the 6.5x55AI bbl in any of the 1000yd prone any/any matches I shot out at CRC near Byers, Co, instead preferring to go with 180VLDs out of the 284 bbl. But in both that rifle and another switch-bbl Bighorn tactical rifle, the 6.5x55AI bbls have shot quite accurately with loads that run not that much faster than the original Swede - and I don't have to trim brass after every firing like was necessary with the original Swede with all its case taper.
 
Schultz & Larsen - Victory, most presise rifle of all and also best trigger.
 
Here is the pair of Husqvarna 1640's I purchased from Simpsons Limited. Top is a 6.5x55 and bottom is a 9.3x62. Super happy with the rifles and Simpsons!
20250929_154031.jpg
 
I have several 6.5x55's, all m96 in Husqvarnas and Carl Gustavs, nothing fancy but good, accurate working guns. The lack of gas shield can be partly alleviated by simply attaching a flat washer to the shroud ( pic below )
The rifle I use the most is a '96 Husky in 6.5x55 Improved, 21" barrel ( in the pic you will see that I was too lazy to cut the extra inch off the barrel when fitting the new stock ), turned down bolt handle and fitted an old Tasco 6x scope, I picked up the stock from a gun show for $80, the recoil pad is only to add LOP because I am 6'4" and have Orangutan arms !! Shooting 129gr Hornady interlocks at around 27-2800 FPS, I have never had to shoot an animal twice. As I said, nothing fancy, a working gun that I did the alterations to myself.
6.5.png
Shroud.jpg
6.5x55 M96.JPG
6.5-284  6.5-9.3x55Imp..JPG
 

Forum statistics

Threads
64,666
Messages
1,424,040
Members
131,725
Latest member
NellyQ8880
 

 

 

Latest posts

Latest profile posts

cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
 
Top