I need some of your wisdom on a 6.5 Swede sporter!

I had a local, well-trained gunsmith use a 6.5x55 match reamer from JGS on a 30" Krieger medium Palma blank for my Nesika K prone rifle back in 2002. That rifle shot really well in the 'any rifle' Palma-format matches I used it in, usually shooting Sierra 142MKs at 2900fps with N165 in Lapua brass. Years later, after I'd started doing my own barrel work, I was looking at the Ackley Improved version of the Swede, and wound up buying a AI reamer for use on a switch bbl BAT 3LL action prone rifle build, doing 30" hvy Palma barrels in both 6.5x55AI & straight 284 Win. I never did shoot the 6.5x55AI bbl in any of the 1000yd prone any/any matches I shot out at CRC near Byers, Co, instead preferring to go with 180VLDs out of the 284 bbl. But in both that rifle and another switch-bbl Bighorn tactical rifle, the 6.5x55AI bbls have shot quite accurately with loads that run not that much faster than the original Swede - and I don't have to trim brass after every firing like was necessary with the original Swede with all its case taper.
 
Schultz & Larsen - Victory, most presise rifle of all and also best trigger.
 
Here is the pair of Husqvarna 1640's I purchased from Simpsons Limited. Top is a 6.5x55 and bottom is a 9.3x62. Super happy with the rifles and Simpsons!
20250929_154031.jpg
 
I have several 6.5x55's, all m96 in Husqvarnas and Carl Gustavs, nothing fancy but good, accurate working guns. The lack of gas shield can be partly alleviated by simply attaching a flat washer to the shroud ( pic below )
The rifle I use the most is a '96 Husky in 6.5x55 Improved, 21" barrel ( in the pic you will see that I was too lazy to cut the extra inch off the barrel when fitting the new stock ), turned down bolt handle and fitted an old Tasco 6x scope, I picked up the stock from a gun show for $80, the recoil pad is only to add LOP because I am 6'4" and have Orangutan arms !! Shooting 129gr Hornady interlocks at around 27-2800 FPS, I have never had to shoot an animal twice. As I said, nothing fancy, a working gun that I did the alterations to myself.
6.5.png
Shroud.jpg
6.5x55 M96.JPG
6.5-284  6.5-9.3x55Imp..JPG
 

Forum statistics

Threads
63,382
Messages
1,394,346
Members
123,911
Latest member
Lynuyuike
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top