Favorite Darling Small-Mid Bore Double?

Wildwillalaska, many Thanks for that pic tutorial, I'll have to get little Wife ahold of that and see, she's the brains of this outfit, smart girls are indeed cool, and awful handy, especially in my case ; ]

BTW Tanks and 318AE, beautiful rifles, Cat and Bushbuck.
 
The 360 Buckhammer is rimmed, it's a straight walled 30-30 that shoots .358 bullets. Ballistically identical to the 358 Winchester. It would make a great whitetail double rifle.

The 360B might make a decent whitetail double-gun round but the .358W is pushing same weight bullets 300+ fps faster. Not sure that could be considered “ballistically identical”.
 
The 360B might make a decent whitetail double-gun round but the .358W is pushing same weight bullets 300+ fps faster. Not sure that could be considered “ballistically identical”.
My load is a 200gr Hornady at 2400fps, that is what I was going off of. We can say its between a 35 Rem and a 35 Win...
20241115_124344.jpg
 
My load is a 200gr Hornady at 2400fps, that is what I was going off of. We can say its between a 35 Rem and a 35 Win...
View attachment 730412

No, I’d say if that is a chronographed load, you’re nipping on the heels of factory .358W. If memory serves, factory velocity numbers for a 200gr bullet are 2500+/- for .358W and 2200+/- for 360B. I wasn’t aware handloaders were bumping the 360B up to the level you claim. Impressive.
 
I do not think the 360 buckhammer will last through time. However for the ranges that DR’s typically are useful, it’s factory ballistics of a 180gr at 2400fps or better yet, a 200gr at 2200fps would be perfect. It is a straight wall case larger than 35 caliber so it would work in certain restricted states. One complaint that I have heard is that almost all the straight wall cartridges are made in cheap rifles with crappy synthetic stocks. Low recoil, effective medium game caliber in a modern cartridge with modern boxed ammo “available”
 

Forum statistics

Threads
64,560
Messages
1,421,841
Members
131,035
Latest member
WUTKarine7
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top