Search results

I'll help a guy out whenever I can, but I only have 30pc. I need to hang on to them to use for my display boards. There is some belted magnum basic (straight wall, no headstamp) brass on Gunbroker you could try. I think there would be a problem with the necks folding in on themselves trying to...

A few of the things I need are: 440 Cor-Bon, 375 H&H Improved, 360 #2 NE, 9.3 BS, 300 H&H Ackley, 30/06 basic, 270 Gibbs. The more exotic are: 460 G&A, 505 Empire, 585 Nyati, 700 AHR. I only need 20 or so of each. I would greatly appreciate if they were sized. I hate having to super glue...

When I first started shooting pistol I took a class at the Junior College a few miles from where I lived. A one income 2 kids and a dog family I couldn't afford to buy a box of ammo 3 times a week so I started handloading them. Two sessions in the class were on handloading. They taught to look...

I had an incident about 5 years ago that nearly filled my shorts. I loaded up 100 rounds of some rifle ammo ( I have forgotten what cartridge it was) with what was supposed to be RL-7. When I was done and putting everything away I saw the powder was AA #7. I immediately tore it all down, covered...

All M70s except the 356, It's a M94 and the 50 B&M Alaskan is a Marlin 1895

All Winchester M70s 25-264 Win Mag Ackley 280 Ackley 275 H&H 7X61 Sharpe & Hart 7mm STW 300 H&H Ackley 8mm Rem Mag 356 Win 358 Norma 9.3 B&M 376 Steyr 400 H&H 416 Howell 404 Jeffery 458 B&M Super Short 450 Ackley 50 B&M Alaskan 50 B&M

Leupolds are my favorite scopes These are the ones I have and how many of each: 1-6--------2 1.25-4-----1 1.5-5------3 1.75-6-----3 2-7--------4 2.5-8------7 3-9cmpct-1 3.5-10-----4 4-12-------2 4.5-14-----3 I definitely would like to have another 1.75-6, but like USMA84DAB I'm also broke. I've...

I have 37 pieces of NEW brass headstamped 585 GMA EXPRESS. I acquired it to use on my cartridge display boards. 585 bullets fall into the cases like a coin into a piggy bank. A little research and I see it is supposed to have a neck and shoulder. My brass is straight wall-what I would call...

several sellers on gunbroker have new

My M70 325 WSM likes 160gr Peregrine VRG-4s. 323 bullet selection is very limited since California passed into law a ban on all leaded hunting ammo- rifle, pistol, and shotgun. They also passed an irrevocable lifetime ban on Bear hunting rather than limiting the number of tags issued like they...

What barrel are you considering using? The 8x68 is on my list to build also. I was planning to use a Pac-Nor Pre-Fit #2 contour 1:9 twist Super Match stainless

I've acquired 5 pieces of 460 Steyr brass to use on my cartridge display boards. I know of only one use for this cartridge-LONG RANGE target competition. I have no proper bullets. Hunting bullets just wouldn't be right. I'm not going to pay $200 for a box of 50 bullets and use just 5 pieces...

There's nothing stamped on the inside of the end flap, but stamped on the outside of the end flap of both boxes is 322205

I have 2 full unopened boxes of North Fork .323" 220gr hollow point bullets. Boxes were marked SS when I bought them on line, but when I looked at them they are HP. I have no use for pointed HP bullets. After decades of seeing pointed hollow point bullets being used only for targets and...

I was thinking since the 7mm WSM was so scarce it may be the one someone needs to complete their set of WSM/WSSM rifles. That's why I had it. Unfortunately I've had to liquidate some of my collection and no longer have the full set. Between the ones I've sold and the ones that have morphed into...

I took the rifle to the local gun dealer today to get a valuation since there has been no interest in it so far. He pulled out a 500 page book and showed me the values of the different conditions. He looked down the barrel and said it had been fired so it would have to sell as used. I was...

PRICE REDUCED!!! $2350

update to listing: added NEW Leupold VX II 4-12x40 set in DNZ Game Reaper mount system. ships in hardcase only. factory box not available

OH NOOO!!! You are mistaken. $75 is for shipping in the factory cardboard box. Photos and purchase price have been posted. Thanx for your interest

NOS in the box 7mm WSM Ultimate Shadow 24" barrel, synthetic stock, gloss blued, 3 down 1 up capacity, 3 position safety, control feed claw extractor. Scope was mounted, and removed, never fired. 7mm WSM caliber in M70-SCARCE. Ultimate Shadow-Scarce. No scratches, dings, or blemishes. See all...

I have 9 boxes of these bullets I was going to use as my "soft" when I go to Africa. A friend I trust implicitly pointed out it would be very difficult to work out a load that would shoot same POI as a 450gr CEB solid-too many physical differences between the two. The 350 Lehigh Xtreme...

About 10 years ago I found myself with a butter tub full of oddball and obsolete cases I had been collecting since I was a kid. I thought why not make some sort of display so I can see them every day. Afterall they were interesting enough to collect. I made the frame out of wood from an old...

The backing fabric is stretched over the cardboard backboard. A piece of Plexiglas is laid on top of that. The cartridges are attached to the Plexi with adhesive. I've made over 500 boards and only one cartridge has ever come loose. There is not usually anything over the front of the display...

I have over 70 patterns and over 30 sizes to choose from-6x9 30 piece $175 to 17x28 187 piece $550. Frames are reclaimed Barnwood. Choose from red or black velvet, sky blue or Navy blue satin backboards. Unfortunately due to import/export regulations I can only ship to US addresses. $65...

Die set arrived today. Excellent condition-near new. THANX

My mistake, I meant to say 4D has the reamer

The 264 WM is too common. I'm in to obscure, obsolete, unusual, and uncommon for my display boards, but once in a while one catches my interest and I build it.

I got an answer back to my email in less than 15 mins. 4D Rentals does have the 25-264 Win Mag Ackley die.

I did not call to check availability because this build would be #6 or 8 on my list-3 or 4 years out. Figured I had plenty of time to deal with dies and reamer. I just called CH4D. 25-264 Win Mag dies are out of stock with at least 24 mo. lead time. They have multiple 25-264 Win Mag Ackley...

I have a Win M70 257 Roberts with a 10" twist that won't stabilize 100gr or more, and a Win M70 25-06 with a 10"twist that will only shoot Barnes TTSX with any accuracy. I like the 25 cal for these little local Blacktail Deer and 200yd+ shots are becoming more the norm than 20 yrs ago when 100yd...

California has had a lead free hunting ammo restriction since 2019 so I'm pretty limited on bullets already. Luckily I have half a dozen sources for lead free bullets. I have loads worked out for most of the guns I might hunt with. I would not expect to go shoot 200 prairie dogs a day for a week...

I don't really care about efficiency-if it takes a full grain of powder to get 10fps I'm OK with it. I once had a M70 264 Win Mag factory new out of the box with absolutely nothing done to it except cleaning. Once I found the load it wanted it would shoot a 10 shot 100yd group and cover it...

I found some of this brass and am going to use it on my display boards. I got to thinking about it and thought "this would be a cool one to build". PTG has a reamer and CH has the dies. All I need is some load data. I'm hoping for 2-3 different powders and 2-3 different bullets, but anything you...

I'm in contact with Michael every couple months. He has helped me out a lot as well with my other B&Ms, but with the H-4198 not so much. I have a 9.3, 458SS, 50 B&M AK, and a week ago picked up my 50 B&M. I bought the 50 B&M used from the gunsmith who built it. He never quite got around to...

Thanks for everyone's input. I use a scam identifier/detection program before buying anything online: https://www.scam-detector.com/ With the low ratings these 2 sites have there is no way I was ever going to be duped by them. Thanx Curtis

I'm out of it and been looking for probably a couple years. I just bought a rifle I'm going to take to Africa for Buffalo-a M70 50 B&M. The data I have shows only H-4198 and IMR 4198. The IMR requires a couple more grains of powder to achieve similar velocities. A couple grains is no biggie for...

checkout Gunbroker: https://www.gunbroker.com/Ammunition-Reloading/search?Keywords=468%20bullets&Sort=13&PageSize=96

All my rifles are working rifles. No "Missy Prissy" once a year to the rifle range Safe Queens here. My "Work Horse" is a Winchester M70 338 Win Mag. I purchased it when I was in the Air Force stationed in Fairbanks Alaska. It was 1984- Alaska's 25th year Statehood anniversary so there were...

I just found half a dozen new cartridges for my display boards. I got the brass for a really good price so it was worth it to me to design a couple new boards to display them. Most of the brass is new, but some of them have been fired. I hate super gluing bullets into cases. It seems so...

Thanks for everyone's help and suggestions. I've found a source for boxer primed Bertram brass and bought a set of dies from a new member here on AH.

I use this website verifying tool. I don't do business with anyone with a score less than 75, and anything under 100 I'm skeptical. https://www.scam-detector.com/validator/

I'm almost out of 318 WR brass for my cartridge display boards. If I have dies I can use fired brass as well as new. I hate gluing bullets into the case. It seems so un-professional. I have a source for new Bertram $5/pc (until they run out), but they don't indicate how many boxes they have left...

I only have one 375. A 376 Steyr. It's a couple hundred fps behind the H&H and Ruger. No slouch for a 30-06 length case. It is a tack driver. It shoots 230gr Peregrines sub-MOA @2775fps. I've used it for Deer, Bears, Elk, and Moose and will take it with to South Africa for Plains Game.

Anyone ever use or know anything about Bull's Eye Taxidermy in Vaalwater SA? They were recommended by the Outfit I'm going on Safari with in 2025 and are celebrating their 20th year in business. I'm going for Buffalo, Eland, Sable and a dozen other Plains Game. Luckily I have found images on...

I make cartridge display board and some of them contain many Dangerous Game/Safari cartridges. Brass can be very hard to find for many of them. Quite often I have to use fired brass when new is not available. I really dislike super gluing the bullets into the case. It's just un-professional...

I have 63 patterns from 6"x9' with 30 pieces to 17"X28" with 187 pieces. Prices vary from $175 for the 6x9 to $525 for the 17x28. Depending on which pattern you choose the cartridges on the boards range from 25 Auto to 700 Nitro Express and 50 BMG.

All sold out. Thanx for all of your purchases Curtis

Found a set of new CH dies in Australia. Thanks for helping out Curtis

I have 2 different batches of brass. One is headstamped 465 NE and the other is HS 500/465 BELL. The length, shoulder, and rim size seem o be the same. There are slight differences in the rim area. Is this just a difference in the manufacturing, or are these considered to be different...

Sorry, I thought that was going into a private conversation not to the open forum. I'm new to using the site and haven't quite figured out how to use everything Curtis