A STRANGE CUSTOM WINCHESTER MODEL 70 - 50 BME CAL ? Descriptio

Mighty cool cartridge.
It needs to be added at AmmoGuide.
It would look nice smack in the middle of this line-up:

z001 - Copy.JPG

I am mighty partial to .338 Lapua Magnum wildcatting. My collection:

26861237-a17a-450c-b527-c0b06adede74_zps2a9sta1c.jpg


Instead of 2.200" case length, my .500-caliber-cat has 2.670" case length,
blown-out /"improved."
Michael Uekotter in Germany collaborated on the .500.
We called it officially the 12.7x68mm Magnum.
I call it unofficially the 49-10, .49-bore of 2010, as with the .30-bore of 1906, .30-06.
Hornady made our dies too, and I shipped a set to him in Germany.
Good quality dies for our job:

100_3045.jpg


100_3044.jpg
z005.JPG
z006.JPG
KUR001.jpg

100_3704.jpg


I liked the 49-10 so much I have two of them, Winchester M70 Classic
and BRNO ZKK 602:
100_3582.jpg


100_3413.jpg
 
Here is the latest UPDATE range test of the 50 BME.

UPDATE .... This time I loaded Reloader 7 as I found in the published loads for 50 B&M Alaskan. Although Max load with this powder was listed as 65g, I stayed conservative with 60g. Fired cases showed rounded primers and next time I will load to 65g and expect to obtain 2300 fps to 2400 fps. The wind came up after the first 4 shots, which separated them from the other 6 - otherwise I think the group would have been around one inch.. This is quickly becoming a very fun cartridge.

The target is shown below.

http://www.buckstix.com/buckpics/50-BME-TARG.jpg
50-BME-TARG-1.jpg
 
Last edited by a moderator:
You could look at .338 and .300 Norma Mag also , since it is a cutdown Lap case and less material to remove .
 
You could look at .338 and .300 Norma Mag also , since it is a cutdown Lap case and less material to remove .
I already made 50 pcs from 338 Lapua so I'm good for now.
 

Forum statistics

Threads
70,426
Messages
1,575,917
Members
170,476
Latest member
GroverStye
 

 

 

Latest profile posts

Hornedfrogbbq wrote on Rhoyland4's profile.
Do you mind me asking what auction you are referencing? I'm not in the market for any of those rifles...just curious.

Frosty in Fort Worth
K_P wrote on Buckleyguy12's profile.
Good morning from Montana.

I'm looking at a post from 2018 where you were looking for a lefty Winchester in .375 H&H Magnum. I'm selling mine. My email is [redacted] in the event that you're still searching for a unicorn.

Best,

Kelly Palmer
Gents, if you book and pay your deposit before the end of this year , you can have the bigger cull package for the 2026 price! https://www.africahunting.com/threa...griffiths-safaris-starting-at-us-2-560.96285/
I am currently in Northern Cape scouting a hunting area, we will have lots of amazing hunting opportunities for 2027! I will post updated available dates soon!
 
Top